StartMini excavatorsTerex › TC29

Terex TC29

Series: Terex Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the TC29, Terex offers a model from the Terex Mini Excavator series. The engine delivers 20.9 kW, has 4 cylinders, with a displacement of 1,491.2 cm³. Rated speed is 2,200 rpm. The unladen weight is 2,939.3 kg. Ground clearance is 271.3 mm. The tank holds 52.2 litres. The pump delivers 99.2 l/min. The hydraulic tank holds 85.2 litres. Working pressure is 210.3 bar. The electrical system runs on 12 V. The engine fitted is the S 4L. The Terex Mini Excavator series covers 10 models. Rated output within it ranges from 13.4 to 26.8 kW; the TC29 sits in the middle of that range with 20.9 kW. Its immediate neighbours are the TC20 below it with 13.4 kW and the HR3.7 above it with 24.2 kW. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelS 4Lcorrect
Power20.9 kWcorrect
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement1,491.2 cm³correct

Dimensions and weights

Ground clearance271.3correct
Unladen weight2,939.3 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow99.2 l/mincorrect
Hydraulic oil capacity85.2 lcorrect
Hydraulic pressure210.3 barcorrect
Fuel tank capacity52.2 lcorrect

Other data

Height2,502.4correct

Where this model stands

Power-to-weight ratio: 7.1 kW/t (21 kW / 2.9 t)

Stronger than 65% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex TC29 have?

The Terex TC29 delivers 20.9 kW.

How much does the Terex TC29 weigh?

The unladen weight is 2,939 kg.

What engine does the Terex TC29 have?

4 cylinders, 1,491 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare