Start › Mini excavators › Terex › HR2.0

Terex HR2.0

Series: Terex Mini Excavator

Source: https://www.technikboerse.com/gebraucht/bagger-789/terex-116

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The HR2.0 from Terex is part of the Terex Mini Excavator series. The engine delivers 13.4 kW, has 3 cylinders, with a displacement of 950.4 cm³. Torque is 54.1 Nm. Rated speed is 2,400 rpm. The unladen weight is 2,000 kg. Ground clearance is 170.7 mm. The tank holds 30.3 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 58.3 l/min. The hydraulic tank holds 35.2 litres. Working pressure is 180 bar. The engine fitted is the L3E-W 262 KL. The Terex Mini Excavator series covers 10 models. Rated output within it ranges from 13.4 to 26.8 kW; the HR2.0 sits at the bottom of that range with 13.4 kW. Its immediate neighbours are the TC29 above it with 20.9 kW. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine modelL3E-W 262 KLcorrect
Power13.4 kWcorrect
Rated speed2,400 rpmcorrect
Torque54.1correct
Speed at max. torque1,500 rpmcorrect
Cylinders3correct
Displacement950.4 cm³correct

Dimensions and weights

Ground clearance170.7correct
Unladen weight2,000 kgcorrect

Working data

Pump flow58.3 l/mincorrect
Hydraulic oil capacity35.2 lcorrect
Hydraulic pressure180 barcorrect
Fuel tank capacity30.3 lcorrect

Where this model stands

Power-to-weight ratio: 6.7 kW/t (13 kW / 2 t)

Stronger than 26% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex HR2.0 have?

The Terex HR2.0 delivers 13.4 kW.

How much does the Terex HR2.0 weigh?

The unladen weight is 2,000 kg.

What engine does the Terex HR2.0 have?

3 cylinders, 950 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

HR1.6

HR16

HR3.7

TC16

TC20

TC29

TC35

TC35E

TC37

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare