StartMini excavatorsTerex › HR3.7

Terex HR3.7

Series: Terex Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex Mini Excavator series from Terex includes the HR3.7. The engine delivers 24.2 kW, has 4 cylinders, with a displacement of 1,720.6 cm³. Torque is 105.1 Nm. Rated speed is 2,100 rpm. The unladen weight is 3,650 kg. Ground clearance is 301.8 mm. The tank holds 65.1 litres. Maximum torque is reached at 1,500 rpm. The pump delivers 94.6 l/min. The hydraulic tank holds 70 litres. Working pressure is 249.9 bar. The engine fitted is the S4L2. The Terex Mini Excavator series covers 10 models. Rated output within it ranges from 13.4 to 26.8 kW; the HR3.7 sits in the upper part of that range with 24.2 kW. Its immediate neighbours are the TC29 below it with 20.9 kW and the HR16 above it with 26.8 kW. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelS4L2correct
Power24.2 kWcorrect
Rated speed2,100 rpmcorrect
Torque105.1correct
Speed at max. torque1,500 rpmcorrect
Cylinders4correct
Displacement1,720.6 cm³correct

Dimensions and weights

Ground clearance301.8correct
Unladen weight3,650 kgcorrect

Working data

Pump flow94.6 l/mincorrect
Hydraulic oil capacity70 lcorrect
Hydraulic pressure249.9 barcorrect
Fuel tank capacity65.1 lcorrect

Other data

Height2,502.4correct

Where this model stands

Power-to-weight ratio: 6.6 kW/t (24 kW / 3.6 t)

Stronger than 77% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex HR3.7 have?

The Terex HR3.7 delivers 24.2 kW.

How much does the Terex HR3.7 weigh?

The unladen weight is 3,650 kg.

What engine does the Terex HR3.7 have?

4 cylinders, 1,721 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare