Terex A300
Series: Terex Rough Terrain Crane
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Terex A400 to A600 and RC35 to RC45: what the number in a rough terrain crane's name actually means
Terex runs its rough terrain cranes in two parallel lines with different numbering logic: the A-Series (A300 to A600) and the RC-Series (RC35 to RC45). In each case the number gives a rough capacity class in tons – not an exact rating. According to manufacturer spec sheets, the A400 lifts a maximum of about 35 tonnes, the A600 about 60 tonnes, and the RC45 about 44 tonnes, each figure only achievable at the shortest boom and widest outrigger spread.
Read on 4 more paragraphs
The "Terex Rough Terrain Crane" bucket here groups 35 live-listed models across both lines. Among 22 models with recorded weight, operating weight starts at 19.3 tonnes and up; engine power across 35 models spans 96 to 223 kW.
Among 34 models with recorded torque, values run from 356 to 1,355 Nm; displacement among 21 models reaches up to 8,300 cm³, and cylinder count among 12 models spans 4 to 6.
Buying used, beyond operating hours, focus on the condition and seal tightness of the boom telescoping cylinders, play in the outriggers, a function test of all four outrigger legs, and the condition of the wire rope drum. Models such as A300, A400, A600, RC35 and RC45 appear across the listed inventory.
One thing every buyer should keep in mind: actual rated capacity always depends on radius and outrigger spread, and isn't found in the model name – only in that crane's load chart.
Sources: Kennwerte der Modelle Terex Rough Terrain Crane, – Terex A600 Rough Terrain Crane Specs (Traglast ca. 60 t), – Terex A400 Rough Terrain Crane Specs (Traglast ca. 35 t), – Terex RC45 Rough Terrain Crane Specs (Traglast ca. 44 t)
Technical data
Engine
| Engine model | F4GE9584D*J601correct |
|---|---|
| Power | 145.5 hp (107 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 620correct |
| Speed at max. torque | 1,300 rpmcorrect |
| Displacement | 6,800.6 cm³correct |
| Aspiration | Turbo superchargedcorrect |
Dimensions and weights
| Ground clearance | 362.7correct |
|---|---|
| Unladen weight | 241,000 kgcorrect |
Drivetrain and chassis
| Gearbox type | DNDA series 20000: powershift transmission with torque convertercorrect |
|---|---|
| Forward gears | 6correct |
| Reverse gears | 6correct |
| Tyre size | 14R24correct |
Working data
| Fuel tank capacity | 240.4 lcorrect |
|---|
Other data
| System voltage | 24 Vcorrect |
|---|
Frequently asked questions
How much power does the Terex A300 have?
The Terex A300 delivers 146 hp.
What engine does the Terex A300 have?
6,801 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Mobile crane in 3D section
Turn the model, look inside and click an assembly — each one is explained.