Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionTerex › 180LC-2

Terex 180LC-2

Series: Terex Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex 180LC-2 belongs to the Terex Hydraulic Excavator series. The engine delivers 121.7 hp (88 kW), with a displacement of 5,883 cm³. Torque is 470.5 Nm. The unladen weight is 17,659.7 kg. The tank holds 280.1 litres. The pump delivers 304.3 l/min. The hydraulic tank holds 186.2 litres. Working pressure is 324 bar. The cooling system holds 20.1 litres. The oil fill is 25.4 litres. The electrical system runs on 24 V. The engine fitted is the Tier III DL06. The Terex Hydraulic Excavator series covers 23 models. Rated output within it ranges from 121.7 to 253.5 hp; the 180LC-2 sits at the bottom of that range with 121.7 hp. Its immediate neighbours are the 1605LC above it with 152.1 hp. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Terex hydraulic excavators TXC140 to TXC520 and 1604 to 1804 – Doosan technology under the Terex name and the Atlas years: 70 to 245 kW, 13 to 51 t

The crawler excavators under the Terex name have two fathers, and the register shows both. The TXC range – TXC140LC to TXC520LC in generations -1 and -2 – arose from a 2003 agreement with Doosan: Terex sold the Korean Solar-series excavators in North America and Europe under its own badge, with Doosan engines DE58, DL06, DE12 and DV11, as the register rows prove; the number gives the weight class in hundreds of kilograms, LC the long-crawler undercarriage with a longer footprint. The agreement ended in 2009 when Doosan began distributing its excavators itself. The 1604LC, 1704LC and 1804LC with Deutz BF6M 1013 engines, by contrast, come from Germany – from the years when Terex owned the excavator maker Atlas Weyhausen of Ganderkesee (2001 to 2010); TC125 and 180LC-2 are further types of those years.

Read on 3 more paragraphs

The register lists 23 versions with 70.1 to 244.6 kW from four- and six-cylinders of 4,031 to 11,061 cm³, torque from 392 to 1,542 Nm at 1,750 to 2,200 rpm and operating weights from 12,800 to 51,392 kg.

For operators that means: a TXC excavator is technically a Doosan Solar, a 1604LC an Atlas – parts, manuals and workshop knowledge run through the respective brand of origin, not through Terex.

On used machines, operating hours, play in slew ring and boom pins, the condition of the undercarriage (tracks, rollers, sprockets), leak-free cylinders and pumps and parts availability through Develon (formerly Doosan) or Atlas are what count.

Sources: Kennwerte der Modelle Terex Hydraulikbagger, Terex (Hersteller)

Technical data

Engine

Engine modelTier III DL06correct
Power121.7 hp (88 kW)correct
Torque470.5correct
Displacement5,883 cm³correct
AspirationTurbocharged air to water intercooledcorrect
Coolant capacity20.1 lcorrect
Engine oil capacity25.4 lcorrect

Dimensions and weights

Unladen weight17,659.7 kgcorrect

Working data

Pump flow304.3 l/mincorrect
Hydraulic oil capacity186.2 lcorrect
Hydraulic pressure324 barcorrect
Fuel tank capacity280.1 lcorrect

Other data

Cab height2,926.1correct
System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 5 kW/t (88 kW / 17.7 t)

Stronger than 35% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex 180LC-2 have?

The Terex 180LC-2 delivers 122 hp.

How much does the Terex 180LC-2 weigh?

The unladen weight is 17,660 kg.

What engine does the Terex 180LC-2 have?

5,883 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare