Start › Excavators & compaction › Terex › 1604LC

Terex 1604LC

Series: Terex Hydraulic Excavator

Source: https://www.kleinanzeigen.de/s-anzeige/terex-minibagger-bagg

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 1604LC from Terex is part of the Terex Hydraulic Excavator series. The engine delivers 196.7 hp (123 kW), with a displacement of 4,791.6 cm³. Rated speed is 2,200 rpm. The unladen weight is 23,000 kg. Ground clearance is 442 mm. The tank holds 270.3 litres. The pump delivers 300.2 l/min. The hydraulic tank holds 320.2 litres. Working pressure is 340 bar. The electrical system runs on 24 V. The engine fitted is the BF6M 2012 C. The Terex Hydraulic Excavator series covers 23 models. Rated output within it ranges from 121.7 to 253.5 hp; the 1604LC sits in the middle of that range with 196.7 hp. Its immediate neighbours are the 1605LC below it with 152.1 hp and the TXC300LC-1 above it with 202.8 hp. 377 Terex models across 29 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelBF6M 2012 Ccorrect
Power196.7 hp (123 kW)correct
Rated speed2,200 rpmcorrect
Displacement4,791.6 cm³correct
AspirationTurbocharging/intercoolercorrect

Dimensions and weights

Ground clearance442correct
Unladen weight23,000 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow300.2 l/mincorrect
Hydraulic oil capacity320.2 lcorrect
Hydraulic pressure340 barcorrect
Fuel tank capacity270.3 lcorrect

Other data

Cab height3,048correct

Where this model stands

Power-to-weight ratio: 5.3 kW/t (123 kW / 23 t)

Stronger than 59% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex 1604LC have?

The Terex 1604LC delivers 197 hp.

How much does the Terex 1604LC weigh?

The unladen weight is 23,000 kg.

What engine does the Terex 1604LC have?

4,792 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1605LC

1704LC

1804LC

180LC-2

TC125

TXC140LC-1

TXC140LC-2

TXC175LC-1

TXC180LC-2

TXC225LC-1

TXC225LC-2

TXC255LC-1

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare