Tat TPW 100
Built: 1991-1991 · Series: Other models
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tat PW 10: an EU class O2 trailer from 2009 with a 3,500 kg gross weight, an 11.38 m length, a 7,120 mm wheelbase and a 2.25 m width
The PW 10 from Tat is a trailer built in 2009. With a gross weight of 3,500 kg it falls into EU trailer class O2, the trailers between 750 and 3,500 kg that usually run on overrun brakes behind cars and light vans. At 11.38 metres long with a 7,120 mm wheelbase, the PW 10 is unusually long for this weight class.
Read on 3 more paragraphs
An unladen weight of 2,000 kg leaves a payload of 1,500 kg against the 3,500 kg gross weight. The 7,120 mm wheelbase across four wheels explains the great length: the axles sit far apart so the long, slender body does not sag. At 2.25 metres wide, the PW 10 stays within the usual road width for trailers in this class.
Long, light O2 trailers of this kind typically carry pipes, masts, boat hulls or building materials, where the length of the load bed matters more than a high payload. In most EU countries an O2 trailer can be towed on a category B licence, as long as the combination stays under the gross weight limit that applies there.
On a trailer this long, check the frame along its full length first: sagging in the middle, rust at the welds and the alignment of the drawbar reveal whether the trailer has stayed straight. Also check the lights working over the 11.38 m length and the condition of the overrun brake and axle bearings. Even tyre wear across all four wheels is worth checking as well.
Sources: Kennwerte des Modells Tat PW 10
Technical data
Dimensions and weights
| Length | 11,800 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 1,800 mmcorrect |
| Unladen weight | 5,400 kgcorrect |
| Gross vehicle weight | 8,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Tat TPW 100 weigh?
The unladen weight is 5,400 kg.
What is the gross vehicle weight of the Tat TPW 100?
8,000 kg.
Up to what speed is the Tat TPW 100 approved?
Approved up to 100 km/h.
What are the dimensions of the Tat TPW 100?
11,800 mm × 2,550 mm.
When was the Tat TPW 100 built?
Production years: 1991.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.