Tana SHARK 440D
Built: 2009 · Series: Other models
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tana – other models: the collective page of Finnish waste compactors outside the named ranges, 440D, Hammerhead D Stage V and Shark 440D, 17,390 to 29,540 kg unladen weight, 21,000 to 30,000 kg gross weight
This page gathers the machines of the Tana brand the register could not assign to a named range. Tana, based in Jyväskylä, Finland, builds waste compactors for landfills, and the types listed here, 440D, Hammerhead D Stage V and Shark 440D, carry the brand's typical product names Hammerhead and Shark; the Stage V suffix refers to the EU emissions stage for mobile machinery. As with many special-purpose machines, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 17,390 to 29,540 kg, gross weights from 21,000 to 30,000 kg, lengths from 10,270 to 10,530 mm and widths from 2,500 to 2,530 mm.
With operating weights from 17 to almost 30 tonnes, the waste compactors are among the heaviest machines on landfill sites, where their toothed steel wheels compact household and bulky waste to extend the landfill's service life. Tana is one of the recognised makers of this machine class and supplies waste-management operators across Europe.
On a used waste compactor, the condition and tooth wear of the compaction wheels, the tightness of hydraulics and engine, corrosion on frame and attachments from aggressive landfill substances, and operating hours and service records all count above all. Parts run through Tana itself. At this machine class, it is also worth checking the condition of the operator's cab, which on landfill sites is exposed to particular dust and gas loads.
Sources: SpecCodex register, model data: Tana (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,300 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 17,390 kgcorrect |
| Gross vehicle weight | 21,000 kgcorrect |
Frequently asked questions
How much does the Tana SHARK 440D weigh?
The unladen weight is 17,390 kg.
What is the gross vehicle weight of the Tana SHARK 440D?
21,000 kg.
What are the dimensions of the Tana SHARK 440D?
10,300 mm × 2,500 mm.
When was the Tana SHARK 440D built?
Production years: 2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
