Tadano Demag 90E
Series: Other models
The 90E is a fully electric pick-and-carry crane from Tadano with a lifting capacity of 9,000 kg and a gross vehicle mass of likewise 9,000 kg. It has a protected operator station fitted as standard, so the operator sits in the machine rather than standing beside it with a radio remote. The boom reaches up to 5.35 m and the head is fixed.
A 48 V, 700 Ah battery feeds a 5 kW DC hydraulic system and a 710 W rear-wheel motor. With a footprint of 3.42 x 1.74 m and a height of 2.36 m, the machine stays handy enough for production halls. Non-marking tyres and drum brakes protect the floor.
Accessories include a hydraulic winch, jibs, radio control, lithium batteries, a closed cab, the ATEX conversion and the Valla Connect monitoring system. Typical use is in manufacturing, where heavy loads have to be moved without emissions and noise.
Tadano Demag cranes – other models: mobile cranes of the E series and rough-terrain cranes of the GR series from Zweibrücken, under Tadano since 2019, capacity class as the model number
This page gathers the Tadano Demag cranes the register could not assign to a named range: mobile telescopic cranes of the E series, where the number in the designation states the lifting-capacity class in tonnes, plus rough-terrain cranes, crawler cranes and aerial platforms from the same plant. The plant in Zweibrücken in the Palatinate built mobile cranes first as Mannesmann Demag, later as Terex-Demag; in 2019 the Japanese crane maker Tadano acquired the plant and the brand rights to Demag Mobile Cranes and has run it since as Tadano Demag, alongside Tadano's own GR range of rough-terrain cranes.
Read on 3 more paragraphs
The register lists here 42 versions, from compact cranes of the 18E and 25E class through large telescopic cranes of the 220SE and 250EC class to rough-terrain cranes of the GR series and aerial platforms.
Mobile cranes of this range are used on building sites, in plant construction and for assembly work, where depending on lifting capacity and reach the choice is between compact city cranes and large cranes for industrial assembly; Zweibrücken, alongside the plants in Japan, ranks among the Tadano group's key production sites for Europe.
On used examples, operating hours and the condition of the engine and hydraulic pumps, wear on the telescopic boom and cable winches, the condition of the outriggers, and the current inspection certificate under the respective national crane regulations all matter; spare parts and servicing run through the Tadano Demag dealer network.
Sources: SpecCodex register, model data: Tadano Demag Krane (weitere Modelle), Tadano Demag (manufacturer)
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Manufacturer documentation, tadano.com (retrieved August 2026) · How we check the data
Mobile crane in 3D section
Turn the model, look inside and click an assembly — each one is explained.
