Start › Excavators & compaction › Sumitomo › SH330-3

Sumitomo SH330-3

Series: Sumitomo Hydraulic Excavator

The photo shows the SH200-3 from the same series. Source: https://commons.wikimedia.org/wiki/File:Excavator,_SH200,_Su

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sumitomo SH330-3 is a model in the Sumitomo Hydraulic Excavator series. The engine delivers 186.4 kW, with a displacement of 7,790.4 cm³. Rated speed is 2,000 rpm. The unladen weight is 33,000 kg. Ground clearance is 481.6 mm. The tank holds 580.3 litres. The hydraulic tank holds 350.2 litres. Working pressure is 343 bar. The engine fitted is the AA-6HK1X. The Sumitomo Hydraulic Excavator series covers 40 models. Rated output within it ranges from 60 to 397 kW; the SH330-3 sits in the lower part of that range with 186.4 kW. Its immediate neighbours are the SH350HD-3 below it with 184 kW and the SH330-5 above it with 202 kW. 49 Sumitomo models across 5 series are on record. The model is listed under Excavators & compaction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine modelAA-6HK1Xcorrect
Power186.4 kWcorrect
Rated speed2,000 rpmcorrect
Displacement7,790.4 cm³correct

Dimensions and weights

Ground clearance481.6correct
Unladen weight33,000 kgcorrect

Working data

Hydraulic oil capacity350.2 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity580.3 lcorrect

Other data

Height3,291.8correct

Where this model stands

Power-to-weight ratio: 5.6 kW/t (186 kW / 33 t)

Stronger than 80% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sumitomo SH330-3 have?

The Sumitomo SH330-3 delivers 186 kW.

How much does the Sumitomo SH330-3 weigh?

The unladen weight is 33,000 kg.

What engine does the Sumitomo SH330-3 have?

7,790 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

SH100-2

SH120-2

SH120-3

SH125X-3

SH130-5

SH135X-3

SH135XU-3B

SH160-5

SH200

SH200-2

SH200-3

SH200HD-3

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare