Sumitomo VA-132M
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Sumitomo – other models: the collective page of MEPS-registered three-phase motors made in Japan and Vietnam outside the named ranges, FA, GA, N and VA series, frame sizes 80 to 225, 0.75 to 55 kW
This page gathers the Sumitomo three-phase motors the Australian energy-efficiency register could not assign to a named range. Model designations split into four ranges – FA, GA, N and VA – each followed by the IEC frame size and a letter for the build length (S, M, L); all 13 motors are four-pole. Manufacture is mostly in Japan, alongside Vietnam and a combination of both countries.
Read on 3 more paragraphs
The register lists here 13 versions with 0.75 to 55 kW, exclusively four-pole, full-load efficiencies from 83.7 to 95.1% and at 75% load from 82.8 to 95.1%. Frame sizes run from 80 to 225, protection is IP54 and IP55, voltage is uniformly 415 V, mounting form is consistently B5. Testing followed the 2019 GEMS determination, mostly with test method B; of 13 motors, 3 reach the 2005 High Efficiency Level and 2 the 2018 level, the remaining 8 stay unclassified.
Sumitomo is one of the large Japanese industrial groups with its own drive-technology division; the four-pole standard motors on this page chiefly complement gear motors and planetary drives there into complete drive solutions for conveyors, agitators and packaging machinery.
When buying used, bearing condition and a checked insulation resistance of the winding, the condition of shaft, key and fan cover, a legible nameplate with range, frame size and efficiency class, and on the B5 flange motors the condition of the centring spigot on the bearing shield all matter; spares run through Sumitomo's distribution.
Sources: Kennwerte der Modelle Sumitomo (weitere Modelle, MEPS-Registrierungen)
Technical data
Engine
| Rated output | 7.5 kWcorrect |
|---|
Dimensions and weights
| Weight | 78 kgcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 4correct |
| Protection class | IP54correct |
| Frame size | 132 M (foot)correct |
| Mounting (IEC 60034-7) | B5correct |
| Efficiency at full load | 90.9 %correct |
| Efficiency at 75 % load | 91.3 %correct |
| Efficiency at half load | 90.6 %correct |
Origin and approval
| Country of manufacture | Japancorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
How much power does the Sumitomo VA-132M have?
The Sumitomo VA-132M delivers 7.5 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.