StartElectric motorsSumitomo › VA-112M

Sumitomo VA-112M

Series: Other models

The photo shows the VA-80M from the same series. Source: https://rintajouppimachine.com/vaihtokoneet/midikaivukoneet-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sumitomo Corporation VA-112M is a three-phase induction motor from the Sumitomo Corporation range. The rated output is 3 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 415 V. The housing is frame size 112 M in foot-mounted form. The protection class is IP54. The efficiency is 89.3 per cent at full load, 89.8 per cent at 75 per cent load and 89 per cent at half load. The motor weighs 43 kg. At full load it delivers 19.7 Nm. The mounting arrangement to IEC 60034-7 is B5. The motor is built in Japan. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Sumitomo Corporation range ranges from 0.75 to 55 kW; the VA-112M sits at the bottom of that range with 3 kW. Its immediate neighbours are the VA-100L below it with 2.2 kW and the VA-132S above it with 5.5 kW. 13 Sumitomo Corporation models are on record. The model is listed under Electric motors. 25 verified figures from 1 source are on file.

Technical data

Engine

Rated output3 kWcorrect

Dimensions and weights

Weight43 kgcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles4correct
Protection classIP54correct
Frame size112 M (foot)correct
Mounting (IEC 60034-7)B5correct
Efficiency at full load89.3 %correct
Efficiency at 75 % load89.8 %correct
Efficiency at half load89 %correct

Origin and approval

Country of manufactureJapancorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Sumitomo VA-112M have?

The Sumitomo VA-112M delivers 3 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare