Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Subaru › Other models › E12-KJ8-VAN-4X4/1810

Subaru E12-KJ8-VAN-4X4/1810

Built: 1988 · Series: Other models

More machines from model year 1988

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Subaru E12-KJ8-VAN-4X4/1810 is a vehicle built by Subaru. Production: 1988. The engine delivers 38 kW, with a displacement of 1,180 cm³. The vehicle is 3,430 mm long and 1,430 mm wide. The unladen weight is 870 kg. The gross vehicle weight is 1,395 kg. Rated output across the Subaru range ranges from 38 to 154 kW; the E12-KJ8-VAN-4X4/1810 sits at the bottom of that range with 38 kW. Its immediate neighbours are the FORESTER above it with 108 kW. Unladen weight across the Subaru range ranges from 870 to 1,741 kg; here the E12-KJ8-VAN-4X4/1810 sits at the bottom of that range with 870 kg. 37 Subaru models across 7 series are on record.

Subaru – other models: the collective page for Sambar micro-vans and vans-registered passenger cars outside the named series, from the two-cylinder kei van to the boxer-engined four-wheel-drive estate, 38 to 154 kW

Subaru is the vehicle brand of Japan's Fuji Heavy Industries, based in Gunma; this page combines two very different types of vehicle that the register could not assign to a named series. On one side is the Sambar, Subaru's kei-class micro-van with a rear engine and typically under 660 cc, whose generations are recorded as E10, E12, KS3 and KS4 – designations that denote the respective production series internally. On the other side are passenger cars such as the Legacy, Outback, Forester, Impreza and XV, registered commercially as vans, and the Baja, a genuine pick-up version of the Legacy/Outback with an open load bed.

Read on 3 more paragraphs

The register holds 27 versions here with 38 to 154 kW from two- to four-cylinder engines of 544 to 2,498 cc, kerb weights from 600 to 1,741 kg, gross vehicle weights from 1,010 to 2,200 kg, lengths from 3,300 to 4,870 mm and widths from 1,390 to 1,875 mm.

The Sambar serves Japan's kei-car segment for inner-city delivery services and tradesmen, while the Legacy, Outback and Forester, with Subaru's boxer engines and four-wheel drive, are popular in the European market among high-mileage drivers in rural areas. The Baja remained a niche model that is scarce in Europe.

On the Sambar, check for corrosion in the floor pan and the condition of the small two- or three-cylinder engine; on the Legacy, Outback and Forester, check the head gasket on the boxer engines, oil seepage from the cylinder-head gaskets, and the condition of the viscous coupling in the four-wheel-drive system. Parts for the Sambar generations are only available in Europe through importers, while parts for the passenger models run through the regular Subaru network.

Sources: SpecCodex register, model data: Subaru (weitere Modelle), Subaru (manufacturer)

Technical data

Engine

Power38 kWcorrect
Displacement1,180 cm³correct

Dimensions and weights

Length3,430 mmcorrect
Width1,430 mmcorrect
Unladen weight870 kgcorrect
Gross vehicle weight1,395 kgcorrect

Where this model stands

Power-to-weight ratio: 43.7 kW/t (38 kW / 0.9 t)

Stronger than 2% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Subaru E12-KJ8-VAN-4X4/1810 have?

The Subaru E12-KJ8-VAN-4X4/1810 delivers 38 kW.

How much does the Subaru E12-KJ8-VAN-4X4/1810 weigh?

The unladen weight is 870 kg.

What is the gross vehicle weight of the Subaru E12-KJ8-VAN-4X4/1810?

1,395 kg.

What engine does the Subaru E12-KJ8-VAN-4X4/1810 have?

1,180 cm³ displacement.

What are the dimensions of the Subaru E12-KJ8-VAN-4X4/1810?

3,430 mm × 1,430 mm.

When was the Subaru E12-KJ8-VAN-4X4/1810 built?

Production years: 1988.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare