Steyr (slt) 40
Series: Other models
The Steyr (slt) 40 is a tractor from Steyr (slt). The engine is rated at 30 kW. Dieselmotor, 3 Zylinder, 2,262 l, 28 kW (38 PS) acted as the engine supplier.
Wheelbase is 1.95 m.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 22 to 240 kW; with 30 kW, the 40 sits at the bottom end. Directly alongside are the Steyr-Daimler 180 with 22 kW below and the 545 Super with 32 kW above.
Technical data
Engine
| Engine make | Steyrcorrect |
|---|---|
| Engine | Dieselmotor, 3 Zylinder, 2, 262 l, 28 kW (38 PS)correct |
| Fuel | dieselcorrect |
| Power | 40 hp (30 kW)correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Height | 1,534correct |
|---|---|
| Wheelbase | 1,950correct |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | St. Valentin, Austriacorrect |
|---|
Frequently asked questions
How much power does the Steyr (slt) 40 have?
The Steyr (slt) 40 delivers 40 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.