Steyr Multi 4100
Built: 2016 · Series: Multi
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steyr Multi: collective page of tractors Multi 4100 to 4120 from St. Valentin, four-cylinder 3,400 cm³ diesels, 73 to 86 kW, lift capacity 5,600 kg
The Multi range from Steyr is built at the Austrian plant in St. Valentin and spans from the 4100 to the 4120; the model numbers rank the three versions by power class. Steyr has been part of the CNH group since being taken over by Case IH/CNH in the late 1990s, but its tractors are still built at the Austrian home plant. The name Multi points to the range's versatility in everyday farm work, from haulage to driving mounted implements, spanning a range of routine tasks on the farm.
Read on 3 more paragraphs
The register lists 3 versions with 73 to 86 kW from four-cylinder diesel engines of 3,400 cm³, an unladen weight of 5,000 kg, a lift capacity of 5,600 kg, a length of 4,197 mm and a height of 2,754 mm, at a rated speed of 2,200 rpm.
Tractors in this mid power class handle the bulk of field work on medium and larger holdings, from tillage to driving heavier implements, competing with the comparable ranges from Case IH, New Holland and Deutz-Fahr, which technically share some of the same group components. The choice between the four-cylinder and larger six-cylinder versions depends on the farm's profile and the type of work involved.
When buying used, condition of the four-cylinder diesel including cooling and injection, the gearbox and hydraulics under full load, and the PTO and lift for wear all matter; spare parts run through the Steyr and CNH dealer network.
Sources: SpecCodex register, model data: Steyr Multi, Steyr
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 99 hp (73 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,400 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,197 mmcorrect |
|---|---|
| Height | 2,754 mmcorrect |
| Wheelbase | 2,430 mmcorrect |
| Unladen weight | 5,000 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 32x32correct |
| Front tyres | 440/65R24correct |
| Rear tyres | 540/65R34correct |
| Top speed | 40 km/hcorrect |
Working data
| Lifting capacity | 5,600 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 14.6 kW/t (73 kW / 5 t)
Power class: Universal (40–100 hp)
Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr Multi 4100 have?
The Steyr Multi 4100 delivers 99 hp.
How much does the Steyr Multi 4100 weigh?
The unladen weight is 5,000 kg.
What engine does the Steyr Multi 4100 have?
4 cylinders, 3,400 cm³ displacement, Diesel.
How fast does the Steyr Multi 4100 go?
Top speed is 40 km/h.
How much does the rear linkage of the Steyr Multi 4100 lift?
The rear linkage lifts 5,600 kg.
What are the dimensions of the Steyr Multi 4100?
4,197 mm × 2,754 mm.
When was the Steyr Multi 4100 built?
Production years: 2016.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.