Steyr 4120 Expert
Built: 2019 · Series: Expert
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steyr Expert – the four-cylinder range from St. Valentin: 4100 to 4140 Expert, the same chassis with 100 to 140 hp, 74 to 103 kW from 4,485 cc
The Steyr Expert range from the St. Valentin plant in Austria, part of CNH since the merger with Case, bundles five power steps of a shared four-cylinder chassis. The type designations 4100 to 4140 Expert give the power class in hp in the last two digits – 4100 Expert with 100 hp, 4140 Expert with 140 hp – while displacement, unladen weight, length and width stay unchanged across the whole range.
Read on 3 more paragraphs
The register lists here 5 versions with 74 to 103 kW or 100 to 140 hp from four-cylinders of a constant 4,485 cc, an unladen weight of 5,500 kg, a lift capacity of 5,600 kg, a length of 4,784 mm, a width of 2,228 mm and a rated speed of 2,200 rpm.
The Expert range sits in the Steyr programme between the smaller compact tractors and the bigger ranges; it targets medium mixed farms in the alpine and pre-alpine regions of Austria and southern Germany, where Steyr has traditionally had a strong presence. The shared chassis base eases maintenance and parts stocking across all five power steps.
On the Expert range, what counts is operating hours and service history of the four-cylinder diesel, the condition of clutch and shuttle transmission, the tightness of the hydraulics and lift, and the condition of the four-wheel-drive clutch and tyres; parts run through the CNH and Steyr dealer network.
Sources: SpecCodex register, model data: Steyr Expert, Steyr (CNH, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 120 hp (88 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,485 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,784 mmcorrect |
|---|---|
| Width | 2,228 mmcorrect |
| Height | 2,730 mmcorrect |
| Wheelbase | 2,490 mmcorrect |
| Unladen weight | 5,500 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | continuously variable continuously variable transmissioncorrect |
| Front tyres | 440/65R28correct |
| Rear tyres | 540/65R38correct |
| Top speed | 40 km/hcorrect |
Working data
| Lifting capacity | 5,600 kgcorrect |
|---|
Other data
| Linkage category | Cat II/IIINcorrect |
|---|
Where this model stands
Power-to-weight ratio: 16 kW/t (88 kW / 5.5 t)
Power class: Large (100–180 hp)
Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr 4120 Expert have?
The Steyr 4120 Expert delivers 120 hp.
How much does the Steyr 4120 Expert weigh?
The unladen weight is 5,500 kg.
What engine does the Steyr 4120 Expert have?
4 cylinders, 4,485 cm³ displacement, Diesel.
How fast does the Steyr 4120 Expert go?
Top speed is 40 km/h.
How much does the rear linkage of the Steyr 4120 Expert lift?
The rear linkage lifts 5,600 kg.
What are the dimensions of the Steyr 4120 Expert?
4,784 mm × 2,228 mm × 2,730 mm.
When was the Steyr 4120 Expert built?
Production years: 2019.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.