Steyr 8095
Built: 1991–1993 · Series: 80
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
8095 (80 series) by Steyr: four-cylinder diesel engine rated at 59 kW (80 hp) at 2,200 rpm, built between 1991 and 1993 in Austria.
Steyr is an Austrian tractor manufacturer based in Upper Austria that has built standard farm tractors for decades and has been part of the international Case IH group since the 1990s. The 80 series represented the mid-power class in the Steyr line-up of those years.
Read on 3 more paragraphs
The 8095 is powered by a four-cylinder diesel engine of 3,456 cm³ displacement, delivering 59 kW (80 hp) at 2,200 rpm. At an unladen weight of 2,770 kg and a top speed of 37 km/h, it is a classic all-purpose tractor for mid-sized farms, neither especially light nor especially heavy for its power class. That works out to roughly 21 watts of engine output per kilogram of unladen weight, a figure typical of four-cylinder standard tractors of this period.
Tractors of this size are built for the full range of field work: soil cultivation, implements mounted on the three-point hydraulic linkage to ISO 730, and driving trailers and equipment through the standard 540 or 1,000 rpm power take-off. The 37 km/h top speed allows brisk road transport between field and farmyard.
When buying a used four-cylinder diesel of this age, check the condition of the clutch and the hydraulic pump, look for engine leaks, and inspect wear in the front axle bearings, since Steyr tractors of this class often accumulated many hours in continuous farm work.
Sources: SpecCodex-Register: Kennwerte des Modells 8095
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 80 hp (59 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,456 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,614 mmcorrect |
|---|---|
| Height | 2,275 mmcorrect |
| Unladen weight | 2,770 kgcorrect |
Drivetrain and chassis
| Gearbox | 16V/8Rcorrect |
|---|---|
| Front tyres | 10, 5-18correct |
| Rear tyres | 14, 9-28correct |
| Top speed | 37 km/hcorrect |
Where this model stands
Power-to-weight ratio: 21.3 kW/t (59 kW / 2.8 t)
Power class: Universal (40–100 hp)
Stronger than 55% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr 8095 have?
The Steyr 8095 delivers 80 hp.
How much does the Steyr 8095 weigh?
The unladen weight is 2,770 kg.
What engine does the Steyr 8095 have?
4 cylinders, 3,456 cm³ displacement, Diesel.
How fast does the Steyr 8095 go?
Top speed is 37 km/h.
What are the dimensions of the Steyr 8095?
3,614 mm × 2,275 mm.
When was the Steyr 8095 built?
Production years: 1991–1993.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.