Sterk STM18
Built: 2019-2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Sterk – other models: the collective page of trailers outside the named ranges, from single-axle to multi-axle versions (EA, TA, DA), container and ballast trailers, unladen weights 210 to 5,730 kg, gross weights up to 24,000 kg
This page gathers the trailers of the Dutch brand Sterk the register could not assign to a named range. Sterk builds heavy commercial trailers with bodywork, container chassis, ballast wagons and open heavy-duty trailers. In the type codes EA stands for enkelas (single-axle), TA for tandemas (tandem-axle) and DA for drieasser (three-axle), AHW is the Dutch abbreviation for aanhangwagen; PL marks platform versions with a flat load area. The suffixes -SW, -MT and designations such as STAB24, STAKA 200R and STM18 run as separate model and variant names.
Read on 3 more paragraphs
The register lists here 26 versions with unladen weights from 210 to 5,730 kg, gross weights from 1,000 to 24,000 kg, lengths from 3,700 to 8,490 mm and widths from 1,400 to 2,750 mm.
The wide span from small single-axle trailers to 24-tonne multi-axle units shows the brand's focus on the commercial construction and transport sector: container and ballast haulage, platform trailers for machinery and building materials, and chassis for bodies fitted by coachbuilders.
On a used purchase, drawbar, overrun brake actuator, axles and brakes count on the single- and tandem-axle versions, load area and locks for wear on the platform and container trailers, and the frame for rust and weld cracking; axles, brakes and lighting are available through the general commercial-trailer trade.
Sources: Kennwerte der Modelle Sterk (weitere Modelle), RDW (Niederlande)
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Unladen weight | 3,090 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Sterk STM18 weigh?
The unladen weight is 3,090 kg.
What is the gross vehicle weight of the Sterk STM18?
19,000 kg.
Up to what speed is the Sterk STM18 approved?
Approved up to 100 km/h.
When was the Sterk STM18 built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1301A
ST 1300 EA 1
ST 2000 AT 1
ST 2000 TA 1
ST 2000 TA1
ST DA SW
ST EA AHW
ST PA PL
ST T AHW
ST TA AT2
ST TA PL
ST-EA-PL
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.