Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Steinbacher › Other models › MBT3.5 ST2

Steinbacher MBT3.5 ST2 – specifications

Built: 1995 · Series: Other models

The Steinbacher MBT3.5 ST2 is a car trailer from Steinbacher (EU vehicle class O2), registered as built in 1995. It is 8,300 mm long and 2,400 mm wide, weighs 630 kg unladen and has a permitted gross weight of 3,500 kg.

Data for the version built 1995 · Data origin: Official register · sources

More machines from model year 1995

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Payload for the Steinbacher MBT3.5 ST2, i.e. permitted gross weight minus unladen weight, is 2,870 kg. More than half of the gross weight is therefore available for cargo.

For the driving licence this means: category B allows combinations up to 3,500 kg, code 96 up to 4,250 kg permitted total mass. With a 3,500 kg trailer too little would remain for the towing vehicle even with code 96 – in practice a BE licence is needed, which covers trailers up to 3,500 kg. Being over 750 kg, the trailer must be braked, and the towing vehicle needs a braked towing capacity of at least 3,500 kg.

Among the 31 car trailers from Steinbacher with a stated length, the Steinbacher MBT3.5 ST2 at 8,300 mm is in the middle of the range (rank 13); the range runs from 6,920 to 10,650 mm.

Steinbacher – other models: tipping and construction-site trailers of the MB/MBT and K series, 256 to 1,800 kg kerb weight, gross weights up to 9,900 kg, long-load versions up to 10.65 m

Steinbacher builds construction and tipping trailers; this collective page groups models outside the named series. The model list is built around the MB and MBT types, supplemented by shorter K and BT designations; the figures attached to the names, as in MBT 2.2A, clearly follow the payload or weight class in tonnes. All chassis are consistently built as tipping trailers with hydraulic tipping gear, side panels and an overrun brake, of the kind used in construction and groundwork for bulk and building materials.

Read on 3 more paragraphs

The register lists 62 versions with kerb weights from 256 to 1,800 kg and gross weights from 900 to 9,900 kg. Widths run from 1,800 to 2,550 mm; 21 models additionally carry lengths from 6,920 to 10,650 mm — well beyond typical site tippers, pointing to a few long-load or transport versions in the range.

Trailers of this size are common on building sites and farms, moving rubble, excavated soil or materials between site and depot. The spread from small single-axle tippers to larger tandem versions makes the range a modular system for varying payloads, typical of many central European trailer builders.

When buying used, check the tipping mechanism (hydraulic ram, seals, load-bed wear), the chassis for rust at weld seams, and the side panels for distortion. The overrun brake and linings should be tested, along with the lighting and plug connection. Spare parts for axles, tyres and tipping rams are generally available through independent trailer-parts suppliers.

Sources: SpecCodex register, model data: Steinbacher

Technical data

Dimensions and weights

Length8,300 mmcorrect
Width2,400 mmcorrect
Unladen weight630 kgcorrect
Gross vehicle weight3,500 kgcorrect

Frequently asked questions

How much does the Steinbacher MBT3.5 ST2 weigh?

The unladen weight of the Steinbacher MBT3.5 ST2 is 630 kg.

What is the gross vehicle weight of the Steinbacher MBT3.5 ST2?

The gross vehicle weight of the Steinbacher MBT3.5 ST2 is 3,500 kg.

What are the dimensions of the Steinbacher MBT3.5 ST2?

Dimensions of the Steinbacher MBT3.5 ST2: length 8,300 mm, width 2,400 mm.

When was the Steinbacher MBT3.5 ST2 built?

The Steinbacher MBT3.5 ST2 was built in 1995.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​‌‍​⁠‍‌​‍​​‌⁠⁠‌⁠​‍⁠‌

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare