Stalword 6X6 RHD
Built: 1967-1968 · Series: Other models
More machines from model year 1967
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
6X6 RHD: light lorry in EU class N2 with an eight-cylinder engine, six wheels and 6x6 four-wheel drive, a gross vehicle weight of 9,595 kg and a kerb weight of 8,920 kg, built 1967 to 1968
The register holds no other series from the manufacturer Stalword, so this text describes the vehicle class the 6X6 RHD of 1967 to 1968 represents: a chassis with drive to all three axles and right-hand steering, of the kind built for off-road special vehicles of that era.
Read on 3 more paragraphs
The 6X6 RHD is driven by an eight-cylinder engine and stands on six wheels, with a wheelbase of only 3,050 mm, a length of 6,350 mm and a width of 2,600 mm. The vehicle weighs 8,920 kg empty, with a gross vehicle weight of 9,595 kg.
At a gross vehicle weight of 9,595 kg the 6X6 RHD falls into EU class N2 between 3.5 and 12 t. The designation 6x6 stands for six wheels with drive to all three axles, a configuration built above all for off-road capability rather than high road speed. The wheelbase of 3,050 mm, short in relation to the vehicle's length, improves manoeuvrability and mobility over uneven ground.
Buying a 6x6 vehicle of this age second-hand starts with checking the transfer cases and driveshafts of all three axles for play and leaks, since a full-time drivetrain to all wheels has more wearing parts than a two-axle vehicle. The eight-cylinder engine calls for a check of compression and the cooling system, and given the 1967 or 1968 build year, frame corrosion and the condition of the axle differentials deserve a look as well, since both are heavily stressed on off-road vehicles.
Sources: SpecCodex-Register: Kennwerte des Modells 6X6 RHD
Technical data
Engine
| Cylinders | 8correct |
|---|
Dimensions and weights
| Length | 6,350 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Wheelbase | 3,050 mmcorrect |
| Unladen weight | 8,920 kgcorrect |
| Gross vehicle weight | 9,595 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Stalword 6X6 RHD weigh?
The unladen weight is 8,920 kg.
What is the gross vehicle weight of the Stalword 6X6 RHD?
9,595 kg.
What engine does the Stalword 6X6 RHD have?
8 cylinders.
What are the dimensions of the Stalword 6X6 RHD?
6,350 mm × 2,600 mm.
When was the Stalword 6X6 RHD built?
Production years: 1967-1968.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
