Technical register for agricultural, construction and commercial machinery · sourced data

St Engineering Land Systems Hunter AFV

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The St Engineering Land Systems Hunter AFV is a machine built by St Engineering Land Systems. The engine delivers 720 hp (530 kW). The machine is 6,900 mm long, 3,400 mm wide and 3,400 mm high. The unladen weight is 29,500 kg. Transmission: HMX3000 hydro-mechanical gearbox continuously variable transmission transmission. Rated output within this group ranges from 16 to 1,500 hp; the Hunter AFV sits in the middle of that range with 720 hp. Its immediate neighbours are the Terrier armoured digger below it with 700 hp and the M60 AVLB above it with 750 hp. Unladen weight within this group ranges from 361 to 62,500 kg; here the Hunter AFV sits in the middle of that range with 29,500 kg.

Hunter AFV: tracked vehicle from ST Engineering Land Systems with an MTU 8V-199 TE20 turbo-diesel V8, 530 kW output and an infinitely variable HMX3000 transmission

ST Engineering Land Systems is the land-systems division of the Singaporean technology group ST Engineering. The Hunter AFV belongs to this manufacturer's tracked vehicles.

Read on 3 more paragraphs

The engine is an MTU 8V-199 TE20, a turbocharged V8 diesel producing 530 kW, or 720 hp. Power is transmitted through a hydro-mechanical, infinitely variable transmission of the HMX3000 type. At a length of 6,900 mm, a width of 3,400 mm and a height of 3,400 mm, this is a large tracked vehicle.

Infinitely variable hydro-mechanical transmissions such as the HMX3000 allow power delivery without the interruptions of discrete gear steps, giving smooth acceleration and steering through the drive units of both tracks. At 530 kW, the Hunter AFV ranks among the more powerful vehicles of its size class.

On a tracked vehicle of this power class, checking the running gear matters particularly, especially track tension, road wheels and drive sprockets, along with the operation of the variable transmission, whose servicing calls for specialist expertise. The turbocharged V8 diesel should be checked for boost pressure and cooling system condition, since high continuous output means correspondingly high thermal loads. The steering clutches on both tracks and the seals of the variable transmission should also be carefully checked given the high power being transmitted.

Sources: SpecCodex-Register: Kennwerte des Modells Hunter AFV

Technical data

Engine

EngineMTU 8V-199 TE20 turbo-dieselcorrect
Power720 hp (530 kW)correct

Dimensions and weights

Length6,900 mmcorrect
Width3,400 mmcorrect
Height3,400 mmcorrect
Unladen weight29,500 kg (combat weight)correct

Drivetrain and chassis

GearboxHMX3000 hydro-mechanical gearbox continuously variable transmission transmissioncorrect

Where this model stands

Power-to-weight ratio: 18 kW/t (530 kW / 29.5 t)

Stronger than 93% of the military & special vehicles in the register — out of 103 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the St Engineering Land Systems Hunter AFV have?

The St Engineering Land Systems Hunter AFV delivers 720 hp.

How much does the St Engineering Land Systems Hunter AFV weigh?

The unladen weight is 29,500 kg.

What are the dimensions of the St Engineering Land Systems Hunter AFV?

6,900 mm × 3,400 mm × 3,400 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare