Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Sisu › SM › SM 340

Sisu SM 340

Built: 1989 · Series: SM

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sisu SM 340 belongs to the SM series. Production: 1989. The engine delivers 346 kW, has 6 cylinders, with a displacement of 14,000 cm³. The vehicle is 10,850 mm long and 2,600 mm wide. The unladen weight is 13,020 kg. The gross vehicle weight is 37,000 kg. The gearbox offers 13 gears. The SM series covers 131 models. Rated output within it ranges from 248 to 392 kW; the SM 340 sits in the upper part of that range with 346 kW. Its immediate neighbours are the SM 332 CPH-41-6X2/610+130 below it with 332 kW and the SM 353 CAKH-8X2/330+140+130 above it with 349.5 kW. Unladen weight within it ranges from 6,800 to 24,600 kg; here the SM 340 sits in the lower part of that range with 13,020 kg. 1416 Sisu models across 44 series are on record.

Sisu SM – heavy Finnish truck for forestry and construction work: six-cylinder diesel engines from 10 to 14 litres, 248 to 392 kW, axle configurations up to 8x2, gross weights up to 44 tonnes

Sisu is a Finnish truck maker with a plant in Kaipiainen and a long tradition as the main supplier of heavy military and special vehicles for the Finnish armed forces, as well as a provider of rugged chassis for forestry, construction and winter road maintenance across northern Europe. The SM range stands in this tradition and was built before the current E range (E11M/E12M), which is listed separately in the register; the letter combinations in the model names, such as CKH or CAKH, distinguish individual versions within the range, though their exact meaning cannot be conclusively resolved from the register alone. A straight-six diesel engine is fitted throughout. The register lists 131 versions with power outputs from 248 to 392 kW and displacements from 10,000 to 14,000 cm³, all with six cylinders. Unladen weights range from 6,800 to 24,750 kg, permissible gross weights from 20,000 to 44,200 kg at widths between 2,500 and 2,850 mm. With axle configurations up to 8x2 and bodies for round-timber haulage, tipper work or towing piste groomers, the SM range serves a niche segment in which Sisu traditionally competes against Volvo, Scania and its own, newer E range. On used examples, important points are rust on the frame and crane mounts on forestry vehicles, the condition of the rear-axle final drive and transfer case on multi-axle versions, the braking system including engine brake, the crane hydraulics on appropriately equipped vehicles, and spare-parts supply, which is limited outside Finland due to low production volumes.

Sources: SpecCodex register, model data: Sisu SM

Technical data

Engine

Power346 kWcorrect
Cylinders6correct
Displacement14,000 cm³correct

Dimensions and weights

Length10,850 mmcorrect
Width2,600 mmcorrect
Unladen weight13,020 kgcorrect
Gross vehicle weight37,000 kgcorrect

Drivetrain and chassis

Gears13correct

Where this model stands

Power-to-weight ratio: 26.6 kW/t (346 kW / 13 t)

Stronger than 74% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sisu SM 340 have?

The Sisu SM 340 delivers 346 kW.

How much does the Sisu SM 340 weigh?

The unladen weight is 13,020 kg.

What is the gross vehicle weight of the Sisu SM 340?

37,000 kg.

What engine does the Sisu SM 340 have?

6 cylinders, 14,000 cm³ displacement.

What are the dimensions of the Sisu SM 340?

10,850 mm × 2,600 mm.

When was the Sisu SM 340 built?

Production years: 1989.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare