Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Sisu › A-45 › A-45 CV/3400

Sisu A-45 CV/3400

Built: 1972 · Series: A-45

More machines from model year 1972

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the A-45 CV/3400, Sisu offers a model from the A-45 series. Production: 1972. The engine delivers 100 kW, has 6 cylinders, with a displacement of 6,540 cm³. The vehicle is 6,100 mm long and 2,350 mm wide. The unladen weight is 5,500 kg. The gearbox offers 10 gears. The A-45 series covers 12 models. Rated output within it ranges from 100 to 130 kW; the A-45 CV/3400 sits at the bottom of that range with 100 kW. Its immediate neighbours are the A-45 CV-4X4/3400/3700 above it with 103 kW. Unladen weight within it ranges from 5,350 to 5,650 kg; here the A-45 CV/3400 sits in the middle of that range with 5,500 kg. 1416 Sisu models across 44 series are on record.

Sisu A-45 – the Finnish 4x4 truck for long-haul and construction work: 6.5-litre six-cylinder engine, 100 to 130 kW, 9 to 9.5-tonne gross vehicle weight

Sisu is a Finnish truck maker based in Finland, building heavy commercial vehicles since the 1930s, and under the Sisu Auto name since the 1990s. The A-45 belonged to the A range built for long-haul transport and construction work; suffixes in the model names, such as CV-4X4 or SCVT-4X4, denote the drivetrain and axle layout, the number after the slash the wheelbase in centimetres. Sisu was founded in 1931 under the name Suomen Autoteollisuus (Finnish Automobile Industry) and was for a long time majority-owned by the Finnish state.

Read on 3 more paragraphs

The register lists 12 versions here with 100 to 130 kW from six-cylinder engines of 6,540 to 6,600 cc, kerb weights of 4,690 to 5,650 kg, gross vehicle weights of 9,050 to 9,500 kg, lengths of 5,700 to 6,100 mm and widths of 2,300 to 2,350 mm.

Sisu trucks such as the A-45 were built for the demands of the Nordic climate and poor roads, and alongside Volvo and Scania were common there, particularly in forestry haulage and on construction sites with all-wheel drive. Because of low population density and long transport routes, ease of local repair traditionally played a major role for Sisu trucks.

On these older Sisu models, key points are corrosion on the frame and cab, the condition of the transfer case and axles on the 4x4 versions, and the braking system; parts are available through Sisu specialists in Finland and Scandinavia.

Sources: SpecCodex register, model data: Sisu A-45

Technical data

Engine

Power100 kWcorrect
Cylinders6correct
Displacement6,540 cm³correct

Dimensions and weights

Length6,100 mmcorrect
Width2,350 mmcorrect
Unladen weight5,500 kgcorrect

Drivetrain and chassis

Gears10correct

Where this model stands

Power-to-weight ratio: 18.2 kW/t (100 kW / 5.5 t)

Stronger than 6% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sisu A-45 CV/3400 have?

The Sisu A-45 CV/3400 delivers 100 kW.

How much does the Sisu A-45 CV/3400 weigh?

The unladen weight is 5,500 kg.

What engine does the Sisu A-45 CV/3400 have?

6 cylinders, 6,540 cm³ displacement.

What are the dimensions of the Sisu A-45 CV/3400?

6,100 mm × 2,350 mm.

When was the Sisu A-45 CV/3400 built?

Production years: 1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare