Siimet Puoliperävaunu
Built: 1967-1967 · Series: Other models
More machines from model year 1967
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Siimet – other models: collective page of Finnish semi-trailers and heavy-haulage trailers outside the named ranges, type code T with axle count, 1.75–46.2 t unladen weight, widths up to 3.78 m
This page gathers the Siimet trailers the register could not assign to a named range. The type designations are usually a T followed by a model number, such as T355 or T492, with added suffixes for axle count and version; the Finnish vehicle register also uses the designation Puoliperävaunu (semi-trailer) and Teli (axle assembly/bogie) as part of some model names. Besides semi-trailers for road use, the register also covers trailers for on-site works traffic, for instance at sawmills and gravel pits.
Read on 3 more paragraphs
The register lists here 139 versions with unladen weights from 1,750 to 46,200 kg and widths from 2.46 to 3.78 m.
The span runs from lighter agricultural and utility trailers to very heavy semi-trailers for heavy and special transport, of the kind used in the Finnish forestry and mining sector for machinery and raw-material haulage. Trailers like these are usually kept in the same operation for decades and only come up for sale after extensive repairs.
When buying used, what counts is the condition of the frame and side members for cracks and corrosion, the condition of the axles, brake system and wheel bearings given the high weights, the kingpin or drawbar eye for wear, and on semi-trailers the fifth-wheel plate. On the heaviest versions it is worth checking the relevant special permit for road transport.
Sources: Kennwerte der Modelle Siimet (weitere Modelle), Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 12,900 mmcorrect |
|---|---|
| Width | 3,300 mmcorrect |
| Unladen weight | 8,000 kgcorrect |
| Gross vehicle weight | 50,000 kgcorrect |
Frequently asked questions
How much does the Siimet Puoliperävaunu weigh?
The unladen weight is 8,000 kg.
What is the gross vehicle weight of the Siimet Puoliperävaunu?
50,000 kg.
What are the dimensions of the Siimet Puoliperävaunu?
12,900 mm × 3,300 mm.
When was the Siimet Puoliperävaunu built?
Production years: 1967.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1452-2
3-AKS
7390-17
HT-8/8.25-15
P311-1
P311-3
P311-4
P674-3
SIIMET TELI 1452
SIIMET TELI 921865
T 241
T 242-12
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.