Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Siemens › 1PC3 › 1PC30051EA600NB0

Siemens 1PC30051EA600NB0

Series: 1PC3

The photo shows the 1PC30051EA200NA0 from the same series. Source: snab-region.ru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Siemens 1PC30051EA600NB0 is a three-phase induction motor built by Siemens. The rated output is 25 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 180 L in foot-mounted form. The protection class is IP55. The efficiency is 94.2 per cent at full load, 94.4 per cent at 75 per cent load and 94 per cent at half load. Mounting arrangements to IEC 60034-7: B3 and B35. The motor is built in Germany. The data is based on the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1PC30051EA600NB0 sits at the bottom of that range with 25 kW. Its immediate neighbours are the 7.6792.0 below it with 22 kW and the 1AV4188A above it with 26 kW. 569 Siemens models across 4 series are on record.

Siemens – 1PC3 series at a glance

The 1PC3 series from Siemens comprises 75 models in the register, in the Electric motors group. Rated power ranges from 6 to 160 kW. Listed in the register: 1PC3004-2CA20-4EA0, 1PC3004-2CA20-4EB0, 1PC3004-2CA24-7EA0, 1PC3004-2CA60-4EA0.

Sources: SpecCodex-Register (eigene Daten)

Technical data

Engine

Rated output25 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size180 L (foot)correct
Mounting (IEC 60034-7)B3, B35correct
Efficiency at full load94.2 %correct
Efficiency at 75 % load94.4 %correct
Efficiency at half load94 %correct

Origin and approval

Country of manufactureGermanycorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Siemens 1PC30051EA600NB0 have?

The Siemens 1PC30051EA600NB0 delivers 25 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare