Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Siemens › 1PC3 › 1PC3005-1DA60

Siemens 1PC3005-1DA60

Series: 1PC3

The photo shows the 1PC3005-1DA60-0KA0 from the same series. Source: global-engineer.ru

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Siemens 1PC3005-1DA60 is a three-phase induction motor. The rated output is 22 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 160 L in foot-mounted form. The protection class is IP55. The efficiency is 92.7 per cent at full load, 92.7 per cent at 75 per cent load and 92 per cent at half load. The motor weighs 123 kg. At full load it delivers 71 Nm. The mounting arrangement to IEC 60034-7 is B3. The motor is built in Germany. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1PC3005-1DA60 sits at the bottom of that range with 22 kW. Its immediate neighbours are the 7.6729.0 below it with 18.5 kW and the 1LA9189-2XA96 above it with 25 kW. 569 Siemens models across 4 series are on record.

Siemens – 1PC3 series at a glance

The 1PC3 series from Siemens comprises 75 models in the register, in the Electric motors group. Rated power ranges from 6 to 160 kW. Listed in the register: 1PC3004-2CA20-4EA0, 1PC3004-2CA20-4EB0, 1PC3004-2CA24-7EA0, 1PC3004-2CA60-4EA0.

Sources: SpecCodex-Register (eigene Daten)

Technical data

Engine

Engine family1PC3005-1DA60correct
Engine families1PC3005-1DA60correct
Rated output22 kWcorrect

Dimensions and weights

Weight123 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size160 L (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load92.7 %correct
Efficiency at 75 % load92.7 %correct
Efficiency at half load92 %correct

Origin and approval

Country of manufactureGermanycorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Siemens 1PC3005-1DA60 have?

The Siemens 1PC3005-1DA60 delivers 22 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare