Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Siemens › 1CV3 › 1CV3131A

Siemens 1CV3131A

Series: 1CV3

The photo shows the 1CV3280B from the same series. Source: mall.siemens.com.cn

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Siemens 1CV3131A is a three-phase induction motor built by Siemens. The rated output is 7.5 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The housing is frame size 132 S in foot-mounted form. The protection class is IP55 and IP65. The efficiency is 90.5 per cent at full load, 91.5 per cent at 75 per cent load and 91.5 per cent at half load. The motor weighs 73 kg. At full load it delivers 24 Nm. The motor is built in Czechia. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1CV3131A sits at the bottom of that range with 7.5 kW. Its immediate neighbours are the 7.6807.0 below it with 5.5 kW and the 1PC30051BA500UA0 above it with 9 kW. 569 Siemens models across 4 series are on record.

Siemens – 1CV3 series at a glance

The 1CV3 series from Siemens comprises 82 models in the register, in the Electric motors group. Rated power ranges from 1 to 160 kW. Listed in the register: 1CV2182A, 1CV2222B, 1CV2252B, 1CV2280B.

Sources: SpecCodex-Register (eigene Daten)

Technical data

Engine

Rated output7.5 kWcorrect

Dimensions and weights

Weight73 kgcorrect

Electrical data

Number of poles2correct
Protection classIP55, IP65correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B9, B10, B14, B15, B20, B25, B30, B34, B35, V1, V2, V3, V4, V5, V6, V8, V9, V10, V14, V15, V16, V18, V19, V30, V31, V36correct
Efficiency at full load90.5 %correct
Efficiency at 75 % load91.45 %correct
Efficiency at half load91.45 %correct

Origin and approval

Country of manufactureCzechiacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Siemens 1CV3131A have?

The Siemens 1CV3131A delivers 7.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare