Siemens 1CV3106B – specifications
Series: 1CV3
The 1CV3106B from Siemens is a three-phase induction motor. The rated output is 4 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 100 L in foot-mounted form. The protection class is IP55. The efficiency is 88.8 per cent at full load, 89.5 per cent at 75 per cent load and 89 per cent at half load. The motor weighs 21 kg. The motor is built in Czechia. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Siemens range ranges from 0.75 to 200 kW; the 1CV3106B sits at the bottom of that range with 4 kW. Its immediate neighbours are the 7.0015.0 below it with 3 kW and the 1 LA5 207-2 above it with 5.5 kW. 569 Siemens models across 4 series are on record.
Build year not documented · Data origin: Official register · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Siemens – 1CV3 series at a glance
The 1CV3 series from Siemens comprises 82 models in the register, in the Electric motors group. Rated power ranges from 1 to 160 kW. Listed in the register: 1CV2182A, 1CV2222B, 1CV2252B, 1CV2280B.
Sources: SpecCodex-Register (eigene Daten)
Technical data
Engine
| Rated output | 4 kWcorrect |
|---|
Dimensions and weights
| Weight | 21 kgcorrect |
|---|
Electrical data
| Number of poles | 4correct |
|---|---|
| Protection class | IP55correct |
| Frame size | 100 L (foot)correct |
| Mounting (IEC 60034-7) | B3, B5, B6, B7, B8, B9, B10, B14, B15, B20, B25, B30, B34, B35, V1, V2, V3, V4, V5, V6, V8, V9, V10, V14, V15, V16, V18, V19, V30, V31, V36correct |
| Efficiency at full load | 88.8 %correct |
| Efficiency at 75 % load | 89.5 %correct |
| Efficiency at half load | 89 %correct |
Origin and approval
| Country of manufacture | Czechiacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1CV2182A
1CV2222B
1CV2252B
1CV2280B
1CV2282B
1CV3082A
1CV3083A
1CV3083B
1CV3090A
1CV3090B
1CV3090C
1CV3094A
Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · Data sources and cross-checks
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.