Sennebogen 817 E – specifications
Series: Compact
Build year not documented · Data origin: Manufacturer information, Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The entry “Compact material handler” describes a compact material handler for sorting tasks in waste management. Compact machines work in halls and on small yards where larger types cannot turn.
Material handlers have a long boom and a cab that can be raised to give a view into containers, truck bodies and onto stockpiles. Attachments are usually grapples, sorting grapples or magnets. Sennebogen builds such machines as crawler and wheeled units, with diesel or electric drive.
Sennebogen, based in Straubing, states it builds complete ranges of duty cycle cranes, crawler cranes, telescopic and harbour cranes, material handlers and telehandlers. The entry “817 E” is listed in the register as a Sennebogen crane, with no further type designation in the name. For assessment, capacity at the given radius, operating weight and drive type count. The load chart of the individual machine is always the binding reference.
Sennebogen Compact – The Smallest Material Handlers for Sorting Tasks
With the 817 E, Sennebogen introduced the smallest material handler in its range at the end of 2017, developed specifically for the demands of the recycling and waste industry. With an operating weight of around 17 tonnes and a reach of up to 9 metres, the mobile compact machine is deliberately positioned below Sennebogen's existing machine classes, while remaining agile and powerful enough for precise sorting and loading work. It can be fitted with a sorting grab or multi-shell grab and, thanks to its low overall height, is also suited to work in halls with low ceilings. In its Electro-Battery version, the 817 E can additionally run emission-free, either on battery or cable power. Listed in the register: a compact material handler for sorting tasks in waste management.
Sources: SENNEBOGEN – 817 E, SENNEBOGEN – Pressemitteilung 817 E
Area: Machines › Construction machinery › Material handlers
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Manufacturer documentation, sennebogen.com (retrieved August 2026) · sennebogen.asia (retrieved October 2026) · directindustry.com (retrieved October 2026) · Data sources and cross-checks
Mobile crane in 3D section
Turn the model, look inside and click an assembly — each one is explained.
