Seka SEKA105
Built: 2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Seka – other models: the collective page of trailers outside the named ranges, with Seka and Seka105, 5,750 to 6,050 kg unladen weight, 38,000 kg gross weight
This page gathers the Seka trailers the register could not assign to a named range – with only two versions listed, it amounts to practically the whole recorded stock of the brand. The types Seka and Seka105 carry the brand name itself as the designation, or add a number to it, with no further scheme readable from that. As with many smaller brands, the figures are drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 5,750 to 6,050 kg, a gross weight of 38,000 kg, lengths from 9,700 to 10,830 mm and a width of 2,550 mm.
With a gross weight of 38 tonnes at a width at the registration limit of 2.55 metres, both versions fall into the semi-trailer class, towed in combination with a tractor unit in heavy-haulage transport; the length difference from 9.7 to nearly 10.83 metres distinguishes the two models on this page.
On a used example, the condition of the frame and axle assemblies, the function of the braking system with its EBS technology, the state of tyres and rims, and rust on load-bearing parts and the kingpin housing all count. For such a small brand, spare parts usually come through independent commercial-vehicle workshops rather than a dedicated dealer network; this applies especially to wear parts in the axle assemblies and braking system, which need replacing more often.
Sources: SpecCodex register, model data: Seka (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,830 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,380 mmcorrect |
| Unladen weight | 6,050 kgcorrect |
| Gross vehicle weight | 38,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Seka SEKA105 weigh?
The unladen weight is 6,050 kg.
What is the gross vehicle weight of the Seka SEKA105?
38,000 kg.
Up to what speed is the Seka SEKA105 approved?
Approved up to 100 km/h.
What are the dimensions of the Seka SEKA105?
10,830 mm × 2,550 mm.
When was the Seka SEKA105 built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
