Sdf Strike TB 105
Built: 2017 · Series: Strike TB
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
SDF Strike TB 105: water-cooled four-cylinder tractor rated at 72 kW, 3,849 cc displacement and 3,300 kg weight from the 2017 Strike TB range
SDF is the Italian corporate group headquartered in Treviglio, which brought together the tractor brands SAME, Deutz-Fahr, Lamborghini and Hürlimann. The Strike TB range belongs to the mid-power segment of the programme and is aimed at all-round yard and field work on medium-sized cultivated holdings.
Read on 3 more paragraphs
The Strike TB 105 is powered by a water-cooled four-cylinder engine of 3,849 cc, producing 72 kW (97 hp) and running on diesel. At a weight of 3,300 kg, the tractor has a hydraulic lift capacity of 3,600 kg. No figures for wheelbase, width or top speed are available for this model.
A four-cylinder of just under four litres with a lift capacity of 3,600 kg marks a medium-heavy field tractor, the kind used for tillage, front-loader work and drawbar work on mid-sized farms. The power take-off runs at the standard 540 or 1,000 rpm, and the three-point hitch follows ISO 730, typically carrying category 2 tillage implements at this lift capacity.
Buying such a young model is worth checking the lift capacity under load and weighing the recorded hours against how the tractor was actually used. Also worth checking at inspection are the tightness of the hydraulic hoses, the condition of the PTO bearings, the cooling system, the cab electronics and whether the service history matches the machine's age.
Sources: SpecCodex-Register: Kennwerte des Modells Strike TB 105
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 97 hp (72 kW)correct |
| Cylinders | 4correct |
| Displacement | 3,849 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Unladen weight | 3,300 kgcorrect |
|---|
Working data
| Lifting capacity | 3,600 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 21.8 kW/t (72 kW / 3.3 t)
Power class: Universal (40–100 hp)
Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Sdf Strike TB 105 have?
The Sdf Strike TB 105 delivers 97 hp.
How much does the Sdf Strike TB 105 weigh?
The unladen weight is 3,300 kg.
What engine does the Sdf Strike TB 105 have?
4 cylinders, 3,849 cm³ displacement, Diesel.
How much does the rear linkage of the Sdf Strike TB 105 lift?
The rear linkage lifts 3,600 kg.
When was the Sdf Strike TB 105 built?
Production years: 2017.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
