Sdf Lamborghini RUBIN 150
Built: 1998–2004 · Series: RUBIN-Baureihe
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
SDF Lamborghini RUBIN 150: six-cylinder tractor with oil-and-water cooling, 110.3 kW, six-litre displacement and 6,845 kg weight from the RUBIN range
Lamborghini Trattori was an independent tractor brand that became part of the same corporate group as SAME, Deutz-Fahr and Hürlimann and continued under its own name. The RUBIN range occupied an upper power segment within it, aimed at larger, professionally run farms.
Read on 3 more paragraphs
The RUBIN 150 is powered by a six-cylinder engine of 6,001 cc with oil-and-water cooling, producing 110.3 kW (150 hp) at 2,350 rpm. At a weight of 6,845 kg, a wheelbase of 2,750 mm and a width of 2,450 mm, the tractor reaches a design top speed of 40 km/h. Height stands at 2,880 mm and length at 4,670 mm. The engine runs on diesel.
A six-cylinder of six litres and a weight of nearly seven tonnes marks a heavy field tractor, the kind used for tillage and drawbar work demanding high pulling force on larger farms. The 40 km/h top speed requires the German T driving licence category, the power take-off runs at the standard 540 or 1,000 rpm, and the three-point hitch follows ISO 730, typically carrying category 2 implements at this weight.
Buying a used six-cylinder this heavy, the oil-and-water cooling and hydraulic tightness deserve particular attention. Also worth checking at inspection are the sheet metal for rust damage, the condition of the PTO bearings, tyre condition given the high kerb weight, and the injection system.
Sources: SpecCodex-Register: Kennwerte des Modells RUBIN 150
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 150 hp (110.3 kW)correct |
| Rated speed | 2,350 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 6,001 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 115.5 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,670 mmcorrect |
|---|---|
| Width | 2,450 mmcorrect |
| Height | 2,880 mmcorrect |
| Wheelbase | 2,750 mmcorrect |
| Ground clearance | 520 mmcorrect |
| Unladen weight | 6,845 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 18 V/18 R and 27 V/27 Rcorrect |
| Front tyres | 480/70 R 30 AScorrect |
| Rear tyres | 580/70 R 38 AScorrect |
| Top speed | 40 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 16.1 kW/t (110 kW / 6.8 t)
Power class: Large (100–180 hp)
Stronger than 83% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Sdf Lamborghini RUBIN 150 have?
The Sdf Lamborghini RUBIN 150 delivers 150 hp.
How much does the Sdf Lamborghini RUBIN 150 weigh?
The unladen weight is 6,845 kg.
What engine does the Sdf Lamborghini RUBIN 150 have?
6 cylinders, 6,001 cm³ displacement, Diesel.
How fast does the Sdf Lamborghini RUBIN 150 go?
Top speed is 40 km/h.
What are the dimensions of the Sdf Lamborghini RUBIN 150?
4,670 mm × 2,450 mm × 2,880 mm.
When was the Sdf Lamborghini RUBIN 150 built?
Production years: 1998–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.