Sdf Lamborghini 55 (DT)
Built: 2005–2009 · Series: CRONO TARGET-Baureihe
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lamborghini Crono Target series: compact agricultural tractors from Cento/Pieve di Cento, from the 55 (DT) to the Crono-Target 70 (DT), 38.2 to 49.3 kW from three-cylinder diesel engines of 3,000 cm³
Lamborghini Trattori was founded in 1948 by Ferruccio Lamborghini in Cento and has been part of the SAME group since the early 1970s, which builds the tractors at the Pieve di Cento plant. This page collects the Crono Target series, from the 55 (DT) to the Crono-Target 70 (DT); the leading number gives the approximate horsepower, and DT in Italian tractor typology stands for Doppia Trazione, meaning four-wheel drive.
Read on 3 more paragraphs
The register lists 2 versions from 38.2 to 49.3 kW from three-cylinder diesel engines of 3,000 cm³ displacement and 205 to 260 Nm of torque at 2,200 rpm. Kerb weights range from 1,940 to 2,070 kg, lengths from 3,085 to 3,270 mm, widths from 1,640 to 1,780 mm and heights from 2,245 to 2,300 mm.
Tractors of this power and weight class cover the compact segment at Lamborghini, suited to smaller and medium-sized farms as well as yard and haulage work; with comparatively low kerb weight and manoeuvrable dimensions, they can also be used in cramped yards.
When buying a used example, check operating hours and the service history of engine and injection pump, the condition of clutch, gearbox and four-wheel drive, the tightness of the hydraulics, and corrosion on cab and wings; since the engineering is largely shared with Same and Deutz-Fahr, spare-parts supply through the SDF dealer network is comparatively good.
Sources: SpecCodex register, model data: Lamborghini Crono Target-Baureihe, Lamborghini Trattori (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 52 hp (38.2 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 205 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,000 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 115.5 mmcorrect |
| Compression ratio | 16correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,085 mmcorrect |
|---|---|
| Width | 1,640 mmcorrect |
| Height | 2,245 mmcorrect |
| Wheelbase | 1,975 mmcorrect |
| Ground clearance | 390 mmcorrect |
| Unladen weight | 1,940 kgcorrect |
Drivetrain and chassis
| Drive | rear- and four-wheel drivecorrect |
|---|---|
| Gearbox | 10 V/10 R and 20 V/10 Rcorrect |
| Front tyres | 7.50-16 ASF (DT: 11.2 R 20 AS)correct |
| Rear tyres | 14.9 R 28 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 19.7 kW/t (38 kW / 1.9 t)
Power class: Universal (40–100 hp)
Stronger than 36% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Sdf Lamborghini 55 (DT) have?
The Sdf Lamborghini 55 (DT) delivers 52 hp.
How much does the Sdf Lamborghini 55 (DT) weigh?
The unladen weight is 1,940 kg.
What engine does the Sdf Lamborghini 55 (DT) have?
3 cylinders, 3,000 cm³ displacement, Diesel.
How fast does the Sdf Lamborghini 55 (DT) go?
Top speed is 30 km/h.
What are the dimensions of the Sdf Lamborghini 55 (DT)?
3,085 mm × 1,640 mm × 2,245 mm.
When was the Sdf Lamborghini 55 (DT) built?
Production years: 2005–2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
