Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Tractors › Sdf › Explorer TB 105

Sdf Explorer TB 105

Series: Explorer TB

Source: https://www.same-tractors.com/en-ea/tractors/explorer-tb

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sdf Explorer TB 105 is a model in the Explorer TB series. The engine delivers 97 hp (72 kW), has 4 cylinders, with a displacement of 3,849 cm³. Rated speed is 2,000 rpm. The machine is 4,117 mm long and 1,939 mm wide. The unladen weight is 3,500 kg. The wheelbase measures 2,400 mm. Lifting capacity is 3,600 kg. The engine is water-cooled. Tyres: front 420/65R20, rear 480/65R28. The fuel is diesel. Rated output across the Sdf range ranges from 68 to 106 hp; the Explorer TB 105 sits in the upper part of that range with 97 hp. Its immediate neighbours are the Agrotron 4.80 below it with 75 hp and the Explorer 110 above it with 106 hp. Rated output across the Sdf range ranges from 50.7 to 79 kW; here the Explorer TB 105 sits in the upper part of that range with 72 kW. 7 Sdf models across 6 series are on record.

SDF Explorer TB 105: water-cooled four-cylinder tractor rated at 72 kW, 3,849 cc displacement and 3,500 kg weight from the Explorer TB range

SDF is the Italian corporate group headquartered in Treviglio, which brought together the tractor brands SAME, Deutz-Fahr, Lamborghini and Hürlimann. The Explorer TB range, alongside the base Explorer line, denotes a more compact build in the same power segment.

Read on 3 more paragraphs

The Explorer TB 105 is powered by a water-cooled four-cylinder engine of 3,849 cc, producing 72 kW (97 hp) at 2,000 rpm. At a weight of 3,500 kg, a wheelbase of 2,400 mm and a width of 1,939 mm, the tractor has a hydraulic lift capacity of 3,600 kg. Length stands at 4,117 mm. The front carries 420/65R20 tyres, the rear 480/65R28. The engine runs on diesel.

A four-cylinder of just under four litres in this build size marks a medium-heavy field tractor, the kind used for tillage and drawbar work with category 2 implements on the three-point hitch to ISO 730. The power take-off runs at the standard 540 or 1,000 rpm, and the differently sized front and rear tyres point to a build suited for front-loader work.

Buying a used Explorer TB model is worth checking the lift capacity under load and the condition of the differently sized front and rear tyres. Also worth checking at inspection are the tightness of the hydraulic hoses, the condition of the PTO bearings, the cooling system, and weighing recorded hours against the tractor's overall condition.

Sources: SpecCodex-Register: Kennwerte des Modells Explorer TB 105

Technical data

Engine

Fueldieselcorrect
Power97 hp (72 kW)correct
Rated speed2,000 rpmcorrect
Cylinders4correct
Displacement3,849 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,117 mmcorrect
Width1,939 mmcorrect
Wheelbase2,400 mmcorrect
Unladen weight3,500 kgcorrect

Drivetrain and chassis

Front tyres420/65R20correct
Rear tyres480/65R28correct

Working data

Lifting capacity3,600 kgcorrect

Where this model stands

Power-to-weight ratio: 20.6 kW/t (72 kW / 3.5 t)

Power class: Universal (40–100 hp)

Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sdf Explorer TB 105 have?

The Sdf Explorer TB 105 delivers 97 hp.

How much does the Sdf Explorer TB 105 weigh?

The unladen weight is 3,500 kg.

What engine does the Sdf Explorer TB 105 have?

4 cylinders, 3,849 cm³ displacement, Diesel.

How much does the rear linkage of the Sdf Explorer TB 105 lift?

The rear linkage lifts 3,600 kg.

What are the dimensions of the Sdf Explorer TB 105?

4,117 mm × 1,939 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare