Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Schmitz Cargobull › Other models › SCB*S3D

Schmitz Cargobull SCB*S3D

Built: 2019-2024 · Series: Other models

More machines from model year 2019

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SCB*S3D comes from Schmitz Cargobull. Production: 2019-2024. The vehicle is 11,250 mm long and 2,520 mm wide. The unladen weight is 5,821 kg. The wheelbase measures 9,160 mm. Top speed is 100 km/h. The gross vehicle weight is 39,000 kg. The vehicle runs on 6 wheels. Unladen weight across the Schmitz Cargobull range ranges from 2,440 to 22,800 kg; the SCB*S3D sits in the lower part of that range with 5,821 kg. Its immediate neighbours are the ZKO18 below it with 5,800 kg and the SPL24/L-1362 EB above it with 5,833 kg. Gross vehicle weight across the Schmitz Cargobull range ranges from 18,000 to 54,000 kg; here the SCB*S3D sits in the middle of that range with 39,000 kg. 379 Schmitz Cargobull models across 18 series are on record.

Schmitz Cargobull – other models: the collective semi-trailer page from Altenberge, curtainsiders, reefers and converter dollies alongside the S.CS and S.KO ranges, unladen weights 2,440 to 22,800 kg

This page gathers the Schmitz Cargobull trailers the register could not assign to a named range. Schmitz Cargobull, based in Altenberge in the Münsterland, traces back to a coach-building business founded by the Schmitz family in 1892 and is today Europe's largest semi-trailer maker; the range spans curtainsiders through single- or multi-compartment reefers to swap bodies and converter dollies for coupling trailer combinations. Today's type codes such as S.CS for curtainsider and S.KO for reefer are Schmitz Cargobull trademarks, while older names such as CARGOBULL KO36 or ACF in the register still show the transitional years of model development.

Read on 3 more paragraphs

The register lists here 119 versions with unladen weights from 2,440 to 22,800 kg and gross weights from 8,577 to 42,000 kg; lengths range from 5,280 to 15,500 mm.

As Europe's largest trailer maker, Schmitz Cargobull supplies hauliers across Europe and is market leader especially in temperature-controlled goods, the reefer division; the model range on this page shows the variety of special bodies, from beverage and double-deck versions to Multitemp units with several cooling zones.

On curtainsiders, what counts is the condition of the tarpaulin and tensioning mechanism; on reefers, the tightness of the insulation and the operating hours of the refrigeration unit; generally, axles, brakes and frame rust, and a complete inspection history; spare parts and service run through the dense Schmitz Cargobull workshop network.

Sources: SpecCodex register, model data: Schmitz Cargobull, Schmitz Cargobull, Zulassungsdaten RDW (Niederlande)

Technical data

Dimensions and weights

Length11,250 mmcorrect
Width2,520 mmcorrect
Wheelbase9,160 mmcorrect
Unladen weight5,821 kgcorrect
Gross vehicle weight39,000 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Schmitz Cargobull SCB*S3D weigh?

The unladen weight is 5,821 kg.

What is the gross vehicle weight of the Schmitz Cargobull SCB*S3D?

39,000 kg.

Up to what speed is the Schmitz Cargobull SCB*S3D approved?

Approved up to 100 km/h.

What are the dimensions of the Schmitz Cargobull SCB*S3D?

11,250 mm × 2,520 mm.

When was the Schmitz Cargobull SCB*S3D built?

Production years: 2019-2024.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
2 current listings for Schmitz Cargobull SCB*S3D on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare