Schmidt Hagen SPC/39/E/10
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Schmidt Hagen – other models: heavy semi-trailers for tank and silo transport outside the named ranges, unladen weights from 2,610 to 32,540 kg, gross weights up to 47,000 kg
This page gathers the Schmidt Hagen semi-trailers the register could not assign to a named range; one model carries the suffix Gasbehälter, German for gas tank, directly in its name. The SP, SPC and SPK types, together with a number sequence giving axle spacing and tank capacity, form the range of tank and silo semi-trailers, while the PT types mark a further version group.
Read on 3 more paragraphs
The register lists here 18 versions with unladen weights from 2,610 to 32,540 kg, gross weights from 16,000 to 47,000 kg, lengths from 5,840 to 13,950 mm and widths from 2,360 to 2,600 mm.
Tank and silo semi-trailers of this size carry bulk goods, liquids or gases for the chemical industry, construction and agriculture; the segment is highly specialised and is shaped, alongside smaller manufacturers such as Schmidt Hagen, by larger tank-body specialists such as Feldbinder and Magyar.
When buying used, tank and silo semi-trailers call for checking the tightness and condition of the vessel including the manhole cover and discharge fittings, registration and inspection history under dangerous-goods rules where applicable, the condition of axles and braking system, and rust on the chassis and underrun protection; parts for the vessel and fittings mostly run through specialist tank-body workshops.
Sources: SpecCodex register, model data: Schmidt Hagen (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,200 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,250 mmcorrect |
| Unladen weight | 5,470 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Schmidt Hagen SPC/39/E/10 weigh?
The unladen weight is 5,470 kg.
What is the gross vehicle weight of the Schmidt Hagen SPC/39/E/10?
39,000 kg.
Up to what speed is the Schmidt Hagen SPC/39/E/10 approved?
Approved up to 100 km/h.
What are the dimensions of the Schmidt Hagen SPC/39/E/10?
10,200 mm × 2,550 mm.
When was the Schmidt Hagen SPC/39/E/10 built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
PT/16/Z/4
PT/18/Z/4
PT18/Z/4
SANH F.GASBEHALTER
SF/33/E/11
SP/18/E/6,5
SP/35/E/13,6
SP/38/E
SP/38/E/13,6
SPC/38/E13,6
SPC/41/E/10 5
SPC/51/E/11,0
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
