Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Schlüter › DX › DX 430

Schlüter DX 430

Built: 1981 · Series: DX

More machines from model year 1981

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Schlüter DX 430 is a tractor from the DX series, built in 1981. 260 hp (191 kW) is what the six-cylinder engine gets out of 9.6 litres.

Power is transmitted through a 18 forward and 6 reverse gears gearbox, drive type: all-wheel drive. It runs on diesel; the engine is air-cooled.

Technical data

Engine

Fueldieselcorrect
Power260 hp (191 kW)correct
Cylinders6correct
Displacement9,572 cm³correct
Coolingair-cooledcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox18V / 6Rcorrect

Origin and approval

Units built4 (Prototypen)correct

Frequently asked questions

How much power does the Schlüter DX 430 have?

The Schlüter DX 430 delivers 260 hp.

What engine does the Schlüter DX 430 have?

6 cylinders, 9,572 cm³ displacement, Diesel.

When was the Schlüter DX 430 built?

Production years: 1981.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare