Schlegl SA3400135
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Schlegl SA3400135: EU class O4 semi-trailer with a gross weight of 39,000 kg, a length of 13,720 mm and a 9,010 mm axle spread, built in 2000.
At a gross weight of 39,000 kg, the SA3400135 reaches the upper loading limit typical of three-axle semi-trailers in Europe and belongs to EU trailer class O4. Rather than its own drawbar, a semi-trailer carries its front load through the kingpin resting on the towing tractor's fifth wheel.
Read on 3 more paragraphs
With an unladen weight of 7,200 kg, the model built in 2000 reaches a payload of around 31,800 kg. Length and width, at 13,720 mm and 2,550 mm, sit close to the European maximum dimensions, and the 9,010 mm spread between kingpin and rear axle group matches the usual layout of a standard long-haul semi-trailer.
Vehicles of this class require an air brake system controlled through the towing tractor's brake line, and drivers need a category CE licence. The slim, long build is suited to palletised or packaged cargo rather than heavy or special loads with high axle weight per metre.
Buying a used semi-trailer of this age, the condition of the kingpin and its wear plate come first, since this is the direct contact point with the fifth wheel. In addition, the air lines should be checked for leaks, the axle suspension for play, and the chassis for corrosion, especially around the axle mounts after two decades of service. The landing gear legs and the tyre wear pattern across all wheels are worth a close look as well.
Sources: SpecCodex-Register: Kennwerte des Modells Schlegl SA3400135
Technical data
Dimensions and weights
| Length | 13,720 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,010 mmcorrect |
| Unladen weight | 7,200 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Schlegl SA3400135 weigh?
The unladen weight is 7,200 kg.
What is the gross vehicle weight of the Schlegl SA3400135?
39,000 kg.
Up to what speed is the Schlegl SA3400135 approved?
Approved up to 100 km/h.
What are the dimensions of the Schlegl SA3400135?
13,720 mm × 2,550 mm.
When was the Schlegl SA3400135 built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.