Scania 124 LA6X2/4 NA 80190 – specifications
Built: 1998 · Series: R
With the 124 LA6X2/4 NA 80190, Scania offers a model from the R series. Production: 1998. The engine has 6 cylinders, with a displacement of 11,705 cm³. The vehicle is 6,900 mm long and 2,550 mm wide. The unladen weight is 14,700 kg. The wheelbase measures 4,500 mm. The gross vehicle weight is 27,000 kg. The vehicle runs on 6 wheels. The R series covers 1736 models. Unladen weight within it ranges from 6,580 to 76,711 kg; the 124 LA6X2/4 NA 80190 sits at the bottom of that range with 14,700 kg. Its immediate neighbours are the 580 LB8X4/4XHHZ below it with 14,675 kg and the 500 LB8X2/4HNB above it with 14,707.5 kg. Gross vehicle weight within it ranges from 10,000 to 76,961 kg; here the 124 LA6X2/4 NA 80190 sits in the lower part of that range with 27,000 kg. 11893 Scania models across 91 series are on record.
Data for the version built 1998 · Data origin: Official register · sources
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania R — the letter is the cab, not the engine
Scania's R says nothing about engine or weight. It names the cab. Scania grades its cabs by height and entry: P is the low one, G the medium, R the tall long-haul cab, S the tallest with a flat floor and no engine tunnel. Anyone looking for an R is therefore looking first for a place to live in — long haul, overnight stays, standing room.
Read on 4 more paragraphs
The number after it is engine output in horsepower. An R 450 has 450 hp, an R 500 has 500. Read together, the designation is cab plus power — unlike MAN or Mercedes, where the first number means gross vehicle weight. Anyone comparing offers across brands should know this difference, or they will be comparing weight against power.
A suffix such as A4x2NA or B6x4HZ often follows. The first letter gives the body type (A = tractor unit, B = platform chassis), the digits the axle configuration, the final letters the suspension — N for air, H for leaf springs on the rear axle. That suffix often says more about a used vehicle's suitability than the horsepower figure does.
Important when searching: two vehicle generations share the letter. The R-series of 2004 was followed in 2016 by the next generation, developed internally as the New Truck Generation. Both are simply called R in listings. Two vehicles with identical designations can therefore be twelve years of development apart — what decides is first registration and emissions standard, not the letter.
Further back, Scania trucks carried plain numbers: 113, 143, 164. There the first digit stood for displacement in litres and the last for the series, so 113 meant eleven litres from the 3-series. That reading no longer applies to the R — but it explains why both systems appear side by side in used listings.
Sources: Scania Group, Wikipedia: Scania 3-series (Wikipedia), Fleet News
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 11,705 cm³correct |
Dimensions and weights
| Length | 6,900 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 4,500 mmcorrect |
| Unladen weight | 14,700 kgcorrect |
| Gross vehicle weight | 27,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
(11,12) C-10X4
112 HL-6X2/4200+1320
112HL-6X2/4600+1320
112M4X2/50DSG-KE
113 H 42 AS 80115 E
113 H 4X2 AL 80115 E
113 H 4X2 ZL 80115 E
113 H 6X2 AL 80190 E
113 H 6X2 ZL 75180 E
113 H 6X2 ZS 75180 E
113 H 6X4 AS 80190 E
113 H 8X4 ZL 140180
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.