Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › Trucks over 12 t (Class N3) › S 500 A4x2LA

Scania S 500 A4x2LA

Built: 2018-2023 · Series: Trucks over 12 t (Class N3)

More machines from model year 2018

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The S 500 A4x2LA from Scania is part of the Trucks over 12 t (Class N3) series. Production: 2018-2023. The engine delivers 368 kW, has 6 cylinders, with a displacement of 12,742 cm³. The vehicle is 5,935 mm long and 2,550 mm wide. The unladen weight is 8,100 kg. The gross vehicle weight is 18,000 kg. The fuel is diesel. The vehicle runs on 2 axles. The gearbox offers 12 gears. The EU vehicle category is N3. The Trucks over 12 t (Class N3) series covers 5780 models. Rated output within it ranges from 103 to 566 kW; the S 500 A4x2LA sits in the middle of that range with 368 kW. Its immediate neighbours are the R 500 CB8X2/4HNA below it with 367.5 kW and the R500 LB-6X2-HNA above it with 369 kW. Unladen weight within it ranges from 3,718 to 49,350 kg; here the S 500 A4x2LA sits at the bottom of that range with 8,100 kg. 11893 Scania models across 91 series are on record.

Reading a Scania — what 93, 113, 124 and 142 tell you

Scania type designations are not arbitrary but a system: the leading digits give the displacement in litres, the last one the series. A 113 is therefore an eleven-litre from the 3-series, a 143 a fourteen-litre of the same generation, a 124 a twelve-litre from the 4-series. The 142, in turn, is a fourteen-litre of the older 2-series. Learn this once and every Scania plate becomes readable.

Read on 4 more paragraphs

The 3-series arrived in 1988 and was replaced by the 4-series in 1995. It covered a remarkable span: from 9 litres with 230 hp to the 14-litre V8 with 500 hp — the same series, from distribution work to heavy haulage. The 3-series was voted Truck of the Year in 1989, cited for ride comfort and economical, reliable engines.

With the 3-series Scania also introduced the Streamline name. Behind it lay more than cosmetics: a revised bumper, a redesigned grille with lower drag and an improved wind deflector on the driver's side. Inside came a curved dashboard, and the engines were reworked.

For the used market this means: two generation changes and some fifteen years of development lie between a 142 and a 124, even though both carry fourteen- and twelve-litre numbers. The number alone says nothing about age — the final digit does.

Many entries in this class come from official registration data. Dimensions, weights and axle counts are reliable; the exact engine variant of an individual vehicle is not always recorded.

Sources: Wikipedia: Scania Serie 3 (Wikipedia), (Wikipedia), eurotransport

Technical data

Engine

Fueldieselcorrect
Power368 kWcorrect
Cylinders6correct
Displacement12,742 cm³correct

Dimensions and weights

Length5,935 mmcorrect
Width2,550 mmcorrect
Unladen weight8,100 kgcorrect
Gross vehicle weight18,000 kgcorrect

Drivetrain and chassis

Gears12correct
Axles2correct

Origin and approval

EU categoryN3correct

Where this model stands

Power-to-weight ratio: 45.4 kW/t (368 kW / 8.1 t)

Stronger than 80% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania S 500 A4x2LA have?

The Scania S 500 A4x2LA delivers 368 kW.

How much does the Scania S 500 A4x2LA weigh?

The unladen weight is 8,100 kg.

What is the gross vehicle weight of the Scania S 500 A4x2LA?

18,000 kg.

What engine does the Scania S 500 A4x2LA have?

6 cylinders, 12,742 cm³ displacement, Diesel.

What are the dimensions of the Scania S 500 A4x2LA?

5,935 mm × 2,550 mm.

When was the Scania S 500 A4x2LA built?

Production years: 2018-2023.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare