Scania RS-SERIEN S650
Built: 2018 · Series: RS-SERIEN
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania RS series – collective page of long-haul tractor units with R and S cabs: 8 versions from R450 to S650, 12.7 to 16.4 litres displacement, 26.5 to 28 tonnes gross vehicle weight
This collective page gathers Scania tractor units with the R and S cabs, the two tallest cabs in the long-haul fleet. The R-cab arrived in 2004 with the PGRT platform, the S-cab followed in 2016 as the flagship with a fully flat floor and no engine tunnel. The numbers in the model designations – 450, 500, 520, 580, 650 – give the rated output in metric horsepower; the code A6X2NB denotes an air-suspended tractor driven through the forward rear axle.
Read on 3 more paragraphs
The register lists 8 versions from six- and eight-cylinder engines of 12,742 to 16,353 cm³. Unladen weights range from 9,720 to 11,895 kg, gross vehicle weights from 26,500 to 28,000 kg, lengths from 5,600 to 9,320 mm and widths from 2,530 to 2,550 mm.
The R- and S-cabs form the backbone of European long-haul transport, where Scania competes with Volvo, Mercedes-Benz and MAN; the S-cab, with its flat floor, is aimed above all at drivers who sleep in the vehicle on a regular basis. The V8 variants with 16.4 litres of displacement serve heavy and special transport.
When buying used R and S models, check the operating hours and service history of the engine, the condition of the air suspension and retarder, tightness of the cooling system, and on the V8 engines the condition of the turbocharger and injection system. Scania offers a consistent parts and service network for both cab types.
Sources: SpecCodex register, model data: Scania RS-Serien, Scania (manufacturer)
Technical data
Engine
| Cylinders | 8correct |
|---|---|
| Displacement | 16,353 cm³correct |
Dimensions and weights
| Length | 6,600 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 4,280 mmcorrect |
| Unladen weight | 10,830 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Scania RS-SERIEN S650 weigh?
The unladen weight is 10,830 kg.
What is the gross vehicle weight of the Scania RS-SERIEN S650?
28,000 kg.
What engine does the Scania RS-SERIEN S650 have?
8 cylinders, 16,353 cm³ displacement.
What are the dimensions of the Scania RS-SERIEN S650?
6,600 mm × 2,550 mm.
When was the Scania RS-SERIEN S650 built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
RS-SERIEN
RS-SERIEN ,R450
RS-SERIEN R520 A6X2NB
RS-SERIEN, R500
RS-SERIEN, R520
RS-SERIEN, R580
RS-SERIEN,S580
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
