Scania RH 4X2
Built: 1985 · Series: RH
More machines from model year 1985
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania RH – the collective page of heavy Scania trucks with axle configurations from 4x2 to 8x2, six- and eight-cylinders from 12.0 to 14.2 litres, gross weights up to 32 tonnes
This page gathers heavy Scania trucks with various axle configurations under one register designation, from 4x2 through 6x2 and 6x4 to 8x2, supplemented by chassis codes such as ZL and ZS for different frame and axle versions. The vehicles gathered here come from Scania's programme for heavy long-haul and special transport, in which six- and eight-cylinder engines, frame lengths and axle counts are combined depending on the body and payload. Scania, headquartered in Södertälje, Sweden, and tracing back to an 1891 wagon works, has been fully part of the Volkswagen Group since 2014.
Read on 3 more paragraphs
The register lists here 13 versions with six- and eight-cylinders of 12,000 to 14,190 cm³, unladen weights from 8,380 to 16,080 kg, gross weights from 18,000 to 32,000 kg, lengths from 6,620 to 9,140 mm and widths from 2,500 to 2,550 mm.
Heavy Scania trucks of this class are common in long-haul transport, as articulated tractors and in special transport work; the multi-axle 6x2 and 8x2 configurations allow higher payloads within statutory axle-load limits and are particularly sought after in construction and heavy haulage.
On used examples, engine and gearbox operating hours count, along with the condition of the clutch and drive axles given the high gross weights, frame and axle corrosion, and on tippers and special bodies the hydraulics; parts run through the Scania network, known for good parts availability even for older ranges.
Sources: SpecCodex register, model data: Scania RH, Scania (manufacturer)
Technical data
Engine
| Cylinders | 8correct |
|---|
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 5,000 mmcorrect |
| Unladen weight | 16,080 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scania RH 4X2 weigh?
The unladen weight is 16,080 kg.
What is the gross vehicle weight of the Scania RH 4X2?
18,000 kg.
What engine does the Scania RH 4X2 have?
8 cylinders.
When was the Scania RH 4X2 built?
Production years: 1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
RH 4X2 ZL 70100
RH 6X2 ZL 65180
RH 6X2 ZL 70180
RH 6X2 ZL 80180
RH 6X2 ZS 65180
RH 6X2 ZS 70180
RH 6X2 ZS 80180
RH 6X2 ZS65180
RH 6X4 ZL 70180
RH 6X4 ZS 70 180
RH 8X2 ZL 140180
RH ZL 70100
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
