Scania PH 6X2 ZL 70180
Built: 1987 · Series: PH
More machines from model year 1987
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania PH – collective page of heavy chassis: axle configurations from 4x2 to 8x2, six-cylinder engines throughout, gross weights from 17,500 to 32,000 kg, 9 versions in the register
This page gathers Scania trucks carried in the register under the designation PH. Scania, headquartered in Södertälje near Stockholm, has built trucks since the early twentieth century and is among Europe's longest-established commercial-vehicle makers. The model names on this page give the axle configuration of the respective chassis – from 4x2 through 6x2, 6x4 and 6x6 to 8x2, with the first digit giving the total number of axles and the second the number of driven axles. All versions recorded in the register carry six-cylinder engines.
Read on 3 more paragraphs
The register lists nine versions, all with six cylinders, unladen weights from 7,620 to 12,900 kg and gross weights from 17,500 to 32,000 kg; widths range from 2,450 to 2,550 mm, recorded lengths from 6,900 to 8,500 mm.
The span from 17.5 to 32 tonnes of gross weight and the range of axle configurations from the simple two-axle to the three-axle all-wheel-drive 6x6 version show a chassis programme for heavy construction, special and abnormal-load transport tasks, in which drive type and axle count decide off-road capability and permissible axle load.
On used examples, operating hours and the condition of the injection system and turbocharger matter, along with clutch and gearbox, on the 6x6 and 8x2 all-wheel-drive versions the transfer case and axles, rust on the frame and cab, and brakes and suspension under full load; parts run through the Scania network.
Sources: SpecCodex register, model data: Scania PH, Scania (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Length | 8,500 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,120 mmcorrect |
| Unladen weight | 9,735 kgcorrect |
| Gross vehicle weight | 25,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Scania PH 6X2 ZL 70180 weigh?
The unladen weight is 9,735 kg.
What is the gross vehicle weight of the Scania PH 6X2 ZL 70180?
25,000 kg.
What engine does the Scania PH 6X2 ZL 70180 have?
6 cylinders.
What are the dimensions of the Scania PH 6X2 ZL 70180?
8,500 mm × 2,550 mm.
When was the Scania PH 6X2 ZL 70180 built?
Production years: 1987.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
PH 4X2 ZL 65100
PH 4X2 ZL 70100
PH 4X4
PH 4X4 ZL 75100 K
PH 6X2 ZL 70180 S
PH 6X4 ZL 70180K
PH 6X6 ZL 75180 K
PH 8X2 ZL 140180
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
