Scania P360 LB6x2HhZ
Built: 2007 · Series: P360
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania P360 – low P cab rated at around 360 hp: five- and six-cylinder engines from 9.3 to 12.7 litres, two-axle to three-axle tractor units up to 37 tonnes
The P360 uses the same P cab as the P280 but pairs it with stronger engines rated around 360 hp; the variants P360, P360 LA6X2/4MNB, P360 LB6x2HSZ, P360 LB6x2HhZ and P360 WSG span two-axle to three-axle chassis with different suspension and drive setups. The low cab height is retained, so this power class too serves distribution and construction vehicles with frequent driver changes.
Read on 3 more paragraphs
The register lists 5 versions with 264 to 280 kW from five- and six-cylinder engines of 9,291 to 12,742 cm³, kerb weights of 8,315 to 25,900 kg, gross vehicle weights of 26,500 to 37,000 kg, lengths of 6,340 to 11,990 mm and widths of 2,550 to 2,600 mm.
With gross weights up to 37 tonnes, the P360 covers both classic construction and municipal duty and heavier three-axle tractor units, filling the gap between Scania's lighter distribution models and its heavy long-haul ranges. Across this power class Scania fits the automated Opticruise gearbox as standard, and many three-axle variants carry electronically controlled air suspension, which makes precise ride-height adjustment easier for specialist bodies.
When buying used construction and municipal variants, the underrun protection, hydraulic connections for tipper or crane bodies, and the brakes on the additional axles deserve close attention; engine and gearbox parts are supplied through the regular Scania dealer network.
Sources: SpecCodex register, model data: Scania P360, Scania (manufacturer)
Technical data
Engine
| Power | 280 kWcorrect |
|---|---|
| Displacement | 11,704 cm³correct |
Dimensions and weights
| Length | 7,720 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 10,520 kgcorrect |
| Gross vehicle weight | 27,500 kgcorrect |
Where this model stands
Power-to-weight ratio: 26.6 kW/t (280 kW / 10.5 t)
Stronger than 49% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Scania P360 LB6x2HhZ have?
The Scania P360 LB6x2HhZ delivers 280 kW.
How much does the Scania P360 LB6x2HhZ weigh?
The unladen weight is 10,520 kg.
What is the gross vehicle weight of the Scania P360 LB6x2HhZ?
27,500 kg.
What engine does the Scania P360 LB6x2HhZ have?
11,704 cm³ displacement.
What are the dimensions of the Scania P360 LB6x2HhZ?
7,720 mm × 2,550 mm.
When was the Scania P360 LB6x2HhZ built?
Production years: 2007.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
