Scania LS 56 46
Built: 1963 · Series: LS
More machines from model year 1963
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scania LS – collective page of the heavy truck range of the 1970s/80s: straight-six and V8 engines under Scania's 110/140 logic, 202 to 295 kW
This page gathers the Scania LS range, heavy trucks of the generation Scania of Södertälje, Sweden, built through the 1970s and 1980s. The first two or three digits of the type designation give the engine family: 110 and 111 denote the straight-six of around eleven litres, 140 and 141 the 14-litre V8. Following digits, as in LS 140 54, mark the power step, and suffixes such as S, HRE or SUPER further equipment and chassis variants.
Read on 3 more paragraphs
The register lists here 50 versions with outputs from 202 to 295 kW, displacements from 5,650 to 14,200 cm³ from four- to eight-cylinders, unladen weights from 5,860 to 13,542 kg against gross weights of 11,999 to 23,500 kg and widths from 2,350 to 2,550 mm.
The LS range stood at the transition from Scania's 2-series to 3-series and was positioned in the heavy segment against the Volvo F10/F12 and Mercedes-Benz NG; it served above all as a long-haul and construction-site truck and as the base for tractor units and tippers.
On used examples, the straight-sixes call for checking the injection pump and turbocharger, the V8 cooling and valvetrain, the frame and axles for rust and suspension wear, and the gearbox and clutch for condition after often high mileages; parts are available through the Scania network and independent commercial-vehicle parts dealers.
Sources: SpecCodex register, model data: Scania LS, Scania (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 7,950 cm³correct |
Dimensions and weights
| Length | 9,250 mmcorrect |
|---|---|
| Width | 2,400 mmcorrect |
| Wheelbase | 5,850 mmcorrect |
| Unladen weight | 8,030 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Scania LS 56 46 weigh?
The unladen weight is 8,030 kg.
What is the gross vehicle weight of the Scania LS 56 46?
18,000 kg.
What engine does the Scania LS 56 46 have?
6 cylinders, 7,950 cm³ displacement.
What are the dimensions of the Scania LS 56 46?
9,250 mm × 2,400 mm.
When was the Scania LS 56 46 built?
Production years: 1963.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
LS 110 34
LS 110 38
LS 110 S 42
LS 110 S 42-6X2/4200+1320
LS 110 S 46 230
LS 11034 S
LS 110385 SHRE
LS 11038SHRE
LS 11046
LS 11050
LS 11050 S HREK
LS 11050 SHRE
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.