Scania/hipocar R410
Built: 2021 · Series: Other models
More machines from model year 2021
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The 2021 Scania R410: a six-cylinder engine of 12,742 cm³, a 26,100 kg gross vehicle weight in class N3 and a payload of around 16,100 kg
The R410 belongs to Scania's R-series, in which the number in the type designation traditionally indicates the approximate engine power in horsepower. This vehicle from 2021 carries the six-cylinder engine of 12,742 cm³, offered in this series in several power ratings. The R-series cab denotes Scania's variant with the tallest roofline in the range.
Read on 3 more paragraphs
At a length of 9,930 mm, a width of 2,550 mm and a wheelbase of 6,300 mm, the vehicle stands on six wheels. With a gross vehicle weight of 26,100 kg and a kerb weight of 10,000 kg, the resulting payload reaches around 16,100 kg, and top speed is limited to 90 km/h.
At 26,100 kg the vehicle sits in the EU weight class N3, above 12 tonnes. The long wheelbase of 6,300 mm on six wheels and the high payload of more than 16 tonnes point to a chassis built for long-distance haulage or for bodies with large load volumes, such as box bodies or tanks.
When buying a used example of a heavy chassis this size, the condition of the rear axle air suspension, the mileage of the six-cylinder engine and the condition of the clutch all matter. With six wheels, the condition of the twin tyres on the drive axle and the tightness of the air brake system also deserve particular attention before taking one on. The service history of the gearbox is also worth checking separately, given the high mileage a long-haul chassis such as this accumulates over its working life.
Sources: SpecCodex-Register: Kennwerte des Modells R410, Scania (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 12,742 cm³correct |
Dimensions and weights
| Length | 9,930 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,300 mmcorrect |
| Unladen weight | 10,000 kgcorrect |
| Gross vehicle weight | 26,100 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Scania/hipocar R410 weigh?
The unladen weight is 10,000 kg.
What is the gross vehicle weight of the Scania/hipocar R410?
26,100 kg.
What engine does the Scania/hipocar R410 have?
6 cylinders, 12,742 cm³ displacement.
How fast does the Scania/hipocar R410 go?
Top speed is 90 km/h.
What are the dimensions of the Scania/hipocar R410?
9,930 mm × 2,550 mm.
When was the Scania/hipocar R410 built?
Production years: 2021.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
