Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Scam › SMT 35

Scam SMT 35

Built: 2005-2005 · Series: Other models

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SMT 35 comes from Scam. Production: 2005. The engine has 4 cylinders, with a displacement of 2,800 cm³. The machine is 2,050 mm wide. The unladen weight is 2,630 kg. The wheelbase measures 3,200 mm. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. Unladen weight across the Scam range ranges from 2,630 to 3,490 kg; the SMT 35 sits at the bottom of that range with 2,630 kg. Its immediate neighbours are the SM354R above it with 3,237 kg. 3 Scam models across 2 series are on record. The model is listed under Vans. 9 verified figures from 1 source are on file.

Scam – collective page of all-wheel-drive conversions on an Iveco Daily base outside the named series: 2.8-litre four-cylinder diesel, gross weight 3,500 kg, length 4,710 mm

Scam is an Italian company that converts Iveco Daily van chassis to all-wheel drive; this collective page lists the versions SM354R and SMT 35, which the register has not assigned to a named series of its own. The number 35 in both designations refers to the 3.5-tonne weight class of the base vehicle.

Read on 3 more paragraphs

The register lists here 2 versions with a four-cylinder engine of 2,800 cc, kerb weights from 2,630 to 3,237 kg, a gross weight of 3,500 kg, a length of 4,710 mm and widths from 2,000 to 2,050 mm.

Daily chassis converted to 4x4 in this class are sought after by rescue services, forestry operations and construction work on rough terrain, where the Daily's standard rear-wheel drive is not enough; the raised ground clearance and transfer case allow work away from made-up roads.

When buying used, check the condition of the transfer case, propshafts and differentials of the 4x4 driveline, rust on the added reinforcements, the brakes and tyres, and the separate parts supply through Iveco for the base vehicle and through Scam for the drive conversion; on an off-road vehicle it is also worth checking for signs of previous rough-terrain use.

Sources: Kennwerte der Modelle Scam

Technical data

Engine

Cylinders4correct
Displacement2,800 cm³correct

Dimensions and weights

Width2,050 mmcorrect
Wheelbase3,200 mmcorrect
Unladen weight2,630 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Scam SMT 35 weigh?

The unladen weight is 2,630 kg.

What is the gross vehicle weight of the Scam SMT 35?

3,500 kg.

What engine does the Scam SMT 35 have?

4 cylinders, 2,800 cm³ displacement.

When was the Scam SMT 35 built?

Production years: 2005.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare