Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › SAME › Other models › CENTAURO-70 (DT)

SAME CENTAURO-70 (DT)

Built: 1981–1987 · Series: Other models

More machines from model year 1981

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SAME CENTAURO-70 (DT) is a machine built by SAME. Production: 1981–1987. The engine delivers 68 hp (50 kW), has 4 cylinders, with a displacement of 3,619 cm³. Torque is 230 Nm. Rated speed is 2,300 rpm. The machine is 3,840 mm long, 1,930 mm wide and 2,400 mm high. The unladen weight is 2,730 kg. The wheelbase measures 2,350 mm. Ground clearance is 420 mm. Top speed is 25 km/h. The tank holds 80 litres. Transmission: 12 V/12 R and 16 V/16 R. The engine is air-cooled. Tyres: front 7.50-16 ASF (DT: 11.2-24 AS), rear 16.9-30 AS. The fuel is diesel. The bore measures 98 mm. The stroke is 120 mm. The compression ratio is 17:1. Maximum torque is reached at 1,400 rpm. Construction: unit construction (no separate frame). Injection pressure is 198 bar. The linkage is category II. The PTO runs at 540/1000 rpm. Rated output across the SAME range ranges from 12.5 to 269 hp; the CENTAURO-70 (DT) sits in the lower part of that range with 68 hp. Its immediate neighbours are the LEONE 70 (DT) below it with 67 hp and the Dorado 66 Dorado 66 Classic above it with 70 hp. Rated output across the SAME range ranges from 12.5 to 269 hp; here the CENTAURO-70 (DT) sits in the lower part of that range with 68 hp. 265 SAME models across 29 series are on record.

SAME – other models: the collective page of Italian tractors outside the named ranges, from Ariete and Delfino to the narrow Frutteto range, DT marking four-wheel drive, 18 to 179 kW

This page gathers the SAME tractors the register could not assign to a named range – from standard tractors with animal names such as Delfino, Falcon, Buffalo and Condor to the narrow Frutteto range for fruit and wine growing. SAME (Società Anonima Motori Endotermici) was founded in 1942 in Treviglio near Bergamo, after Francesco Cassani had already built an early diesel four-wheel-drive tractor there in 1927; Lamborghini Trattori joined the group in 1972, Hürlimann in 1977, and since the 1995 merger with Deutz-Fahr the group has traded as SDF, still headquartered in Treviglio. The DT suffix on Italian tractors traditionally stands for Doppia Trazione, four-wheel drive, and appears on numerous types on this page such as the Buffalo DT and Condor-55 (DT). The engines historically came from the company's own production in Treviglio, and after the Deutz-Fahr merger, per the register, also from Deutz.

Read on 3 more paragraphs

The register lists here 134 versions with 18.4 to 179 kW or 25 to 244 hp from two- to six-cylinders of 1,118 to 7,146 cm³, unladen weights from 1,005 to 7,500 kg and gross weights from 4,100 to 12,000 kg.

SAME is one of the traditional Italian tractor brands and is strongly represented in Italy itself, France and Eastern Europe; the narrow Frutteto range is a benchmark in fruit and wine growing, where it competes with the group siblings Lamborghini and Hürlimann as well as Landini and Fendt for narrow row spacings.

On used tractors, engine condition and rust on sheet metal and cab count, clutch and gearbox, front axle and transfer case on the DT four-wheel-drive types, and on the Frutteto range the condition of cab guards and hydraulics; parts run through the SDF network of SAME Deutz-Fahr.

Sources: SpecCodex register, model data: SAME (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power68 hp (50 kW)correct
Rated speed2,300 rpmcorrect
Torque230 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders4correct
Displacement3,619 cm³correct
Bore98 mmcorrect
Stroke120 mmcorrect
Compression ratio17correct
Injection pressure198 barcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,840 mmcorrect
Width1,930 mmcorrect
Height2,400 mmcorrect
Wheelbase2,350 mmcorrect
Ground clearance420 mmcorrect
Unladen weight2,730 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox12 V/12 R and 16 V/16 Rcorrect
Front tyres7.50-16 ASF (DT: 11.2-24 AS)correct
Rear tyres16.9-30 AScorrect
Top speed25 km/hcorrect

Working data

Fuel tank capacity80 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 18.3 kW/t (50 kW / 2.7 t)

Power class: Universal (40–100 hp)

Stronger than 47% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the SAME CENTAURO-70 (DT) have?

The SAME CENTAURO-70 (DT) delivers 68 hp.

How much does the SAME CENTAURO-70 (DT) weigh?

The unladen weight is 2,730 kg.

What engine does the SAME CENTAURO-70 (DT) have?

4 cylinders, 3,619 cm³ displacement, Diesel.

How fast does the SAME CENTAURO-70 (DT) go?

Top speed is 25 km/h.

What are the dimensions of the SAME CENTAURO-70 (DT)?

3,840 mm × 1,930 mm × 2,400 mm.

When was the SAME CENTAURO-70 (DT) built?

Production years: 1981–1987.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare