Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › SAME › Dorado Natural › Dorado 80 Natural

SAME Dorado 80 Natural

Built: 2019 · Series: Dorado Natural

More machines from model year 2019

Source: mascus.com.tr

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SAME Dorado 80 Natural belongs to the Dorado Natural series. Production: 2019. The engine delivers 75 hp (55 kW), has 3 cylinders, with a displacement of 2,887 cm³. Rated speed is 2,000 rpm. The machine is 3,860 mm long, 1,795 mm wide and 2,473 mm high. The unladen weight is 3,200 kg. The wheelbase measures 2,100 mm. Lifting capacity is 2,500 kg. The engine is water-cooled. Tyres: front 320/85 R20”, rear 420/85 R28”. The fuel is diesel. Rated output across the SAME range ranges from 12.5 to 269 hp; the Dorado 80 Natural sits in the lower part of that range with 75 hp. Its immediate neighbours are the CENTURION-75 (DT) below it with 73 hp and the SATURNO 80 (DT) above it with 77 hp. Rated output across the SAME range ranges from 12.5 to 269 hp; here the Dorado 80 Natural sits in the lower part of that range with 75 hp. 265 SAME models across 29 series are on record.

SAME Dorado 80 Natural (2019): water-cooled three-cylinder standard tractor with 55 kW output and a 2,500 kg lift capacity from the Dorado Natural series

The Dorado 80 Natural was built in 2019 as part of the Dorado Natural series from the Italian maker SAME and belongs to the newer standard tractors of the mid power class in the current line-up.

Read on 3 more paragraphs

The water-cooled three-cylinder diesel engine displaces 2,887 cm³ and delivers 55 kW at 2,000 rpm, equivalent to 75 horsepower. With a weight of 3,200 kg, a wheelbase of 2,100 mm, a width of 1,795 mm and a rear hydraulic lift capacity of 2,500 kg, the Dorado 80 Natural is built for versatile work on medium-sized holdings.

Three-cylinder engines of around 2.9 litres displacement and about 75 horsepower form the backbone of the mid power class in modern standard tractors, powerful enough for most tillage implements and for driving power-take-off machinery, without yet reaching the heavier four-cylinder class. A lift capacity of 2,500 kg is sufficient for most implements typical of this class.

When buying a used Dorado 80 Natural, the hydraulic pump and lift cylinders should be checked under load to confirm the stated lift capacity. The condition of the cooling system and turbocharger also deserves a check, since modern turbocharged three-cylinder diesel engines are sensitive to neglected maintenance. A look at the operating-hours history also helps assess how intensively the tractor has been used so far, beyond what the odometer alone shows.

Sources: SpecCodex-Register: Kennwerte des Modells Dorado 80 Natural

Technical data

Engine

Fueldieselcorrect
Power75 hp (55 kW)correct
Rated speed2,000 rpmcorrect
Cylinders3correct
Displacement2,887 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,860 mmcorrect
Width1,795 mmcorrect
Height2,473 mmcorrect
Wheelbase2,100 mmcorrect
Unladen weight3,200 kgcorrect

Drivetrain and chassis

Front tyres320/85 R20”correct
Rear tyres420/85 R28”correct

Working data

Lifting capacity2,500 kgcorrect

Where this model stands

Power-to-weight ratio: 17.2 kW/t (55 kW / 3.2 t)

Power class: Universal (40–100 hp)

Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the SAME Dorado 80 Natural have?

The SAME Dorado 80 Natural delivers 75 hp.

How much does the SAME Dorado 80 Natural weigh?

The unladen weight is 3,200 kg.

What engine does the SAME Dorado 80 Natural have?

3 cylinders, 2,887 cm³ displacement, Diesel.

How much does the rear linkage of the SAME Dorado 80 Natural lift?

The rear linkage lifts 2,500 kg.

What are the dimensions of the SAME Dorado 80 Natural?

3,860 mm × 1,795 mm × 2,473 mm.

When was the SAME Dorado 80 Natural built?

Production years: 2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
1 current listings for SAME Dorado 80 Natural on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · UK government data (DVLA) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare