Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › SAME Deutz Fahr › Agrokid - Reihe › Agrokid 35 A

SAME Deutz Fahr Agrokid 35 A

Built: 1996–2004 · Series: Agrokid - Reihe

More machines from model year 1996

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Agrokid 35 A, SAME Deutz Fahr offers a model from the Agrokid - Reihe series. Production: 1996–2004. The engine delivers 35 hp (25.8 kW), has 4 cylinders, with a displacement of 1,490 cm³. Rated speed is 3,000 rpm. The machine is 2,985 mm long, 1,120 mm wide and 2,000 mm high. The unladen weight is 1,235 kg. The wheelbase measures 1,630 mm. Ground clearance is 345 mm. Top speed is 27 km/h. Transmission: 12V/12R. The engine is water-cooled. Tyres: front 7.00-12, rear 11.2 R 20. The fuel is diesel. The bore measures 78 mm. The stroke is 78 mm. Construction: unit construction (no separate frame). The Agrokid - Reihe series covers 8 models. Rated output within it ranges from 25 to 47 hp; the Agrokid 35 A sits in the middle of that range with 35 hp. Its immediate neighbours are the Agrokid 25 (HST) below it with 25 hp and the Agrokid 40 (45) above it with 40 hp. Unladen weight within it ranges from 1,005 to 1,420 kg; here the Agrokid 35 A sits in the middle of that range with 1,235 kg. 200 SAME Deutz Fahr models across 35 series are on record.

Deutz-Fahr Agrokid: the brand's smallest series, 35 to 47 hp, three- and four-cylinder diesels, choice of mechanical or hydrostatic HST transmission

The Agrokid series occupied Deutz-Fahr's lowest power segment, for small farms, municipal services and part-time farmers, with noticeably lower weight than every other SDF series covered here.

Read on 4 more paragraphs

The register lists 8 live models, from the Agrokid 25 (HST) to the Agrokid 230, built between 1996 and 2008. Output ranges from 18.4 to 35 kW, or 35 to 47 hp, weight from 1,005 to 1,420 kg, displacement from 1,118 to 1,758 cm3, across three- and four-cylinder engines.

The "HST" suffix on the Agrokid 25 denotes a hydrostatic transmission, favoured precisely in this power class for municipal and horticultural applications.

At just over a tonne, the Agrokid stands as the compact counterpart to the large Agrotron and Agrotrac flagships within the same group.

When buying a used Agrokid, besides clutch and hydraulic tightness, on the HST version the condition and tightness of the hydrostatic pump and drive motor matter, as these wear faster under intensive municipal use than a mechanical gearbox; on the small-displacement three- and four-cylinder engines, radiator tightness counts too. Parts run through the SAME Deutz-Fahr group. PTO and three-point hitch correspond in this small power class to ISO 730 Category I at 540 rpm, sufficient for mowers, snow blowers and small trailers. At a rated speed of 3,000 rpm, the small-displacement Agrokid engines spin noticeably faster than the larger SDF series, typical of compact engines of this design.

Sources: SpecCodex register, model data: Deutz-Fahr Agrokid

Technical data

Engine

Fueldieselcorrect
Power35 hp (25.8 kW)correct
Rated speed3,000 rpmcorrect
Cylinders4correct
Displacement1,490 cm³correct
Bore78 mmcorrect
Stroke78 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length2,985 mmcorrect
Width1,120 mmcorrect
Height2,000 mmcorrect
Wheelbase1,630 mmcorrect
Ground clearance345 mmcorrect
Unladen weight1,235 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox12V/12Rcorrect
Front tyres7.00-12correct
Rear tyres11.2 R 20correct
Top speed27 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 20.9 kW/t (26 kW / 1.2 t)

Power class: Compact (< 40 hp)

Stronger than 21% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the SAME Deutz Fahr Agrokid 35 A have?

The SAME Deutz Fahr Agrokid 35 A delivers 35 hp.

How much does the SAME Deutz Fahr Agrokid 35 A weigh?

The unladen weight is 1,235 kg.

What engine does the SAME Deutz Fahr Agrokid 35 A have?

4 cylinders, 1,490 cm³ displacement, Diesel.

How fast does the SAME Deutz Fahr Agrokid 35 A go?

Top speed is 27 km/h.

What are the dimensions of the SAME Deutz Fahr Agrokid 35 A?

2,985 mm × 1,120 mm × 2,000 mm.

When was the SAME Deutz Fahr Agrokid 35 A built?

Production years: 1996–2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare